CKD STSB-1620-P73 Guided Air Cylinder Slide Table Limit T3H Switches

( Brand: Ckd ), ( Manufacturer Part Number: STSB-1620-P73 ), ( Part Type: Switch Cylinder Slide Table ), ( Bore Diameter: 16mm ), ( Cylinder Action: Double-acting ), ( Cylinder Type: Slide Table Air Cylinder ), ( Stroke Length: 20mm ), ( Suitable Media: Compressed Air )

Review CKD Guided Air Cylinder Slide Table T3h Limit Switches

The **CKD STSB-1620-P73 Guided Air Cylinder Slide Table with T3H Limit Switches** is a precision-engineered, high-performance linear motion system designed for demanding industrial applications requiring smooth, repeatable, and reliable movement along a guided path. This robust slide table combines the efficiency of pneumatic actuation with the precision of hardened steel guideways, delivering exceptional load-bearing capacity and positional accuracy in environments where space optimization and forceful motion are critical. The **STSB-1620** model features a **1620 mm (64-inch) stroke length**, making it ideal for applications such as material handling, assembly lines, indexing systems, or automated testing setups where extended travel distances are necessary without compromising stability. Its **P73** variant incorporates **dual hardened steel guide rails** mounted on both sides of the table, ensuring minimal friction, reduced wear, and enhanced resistance to misalignment, vibration, or side loads key factors that extend the system s operational lifespan and maintain consistent performance under heavy-duty conditions.

At the heart of this slide table is CKD s **T3H series limit switches**, which provide precise, configurable end-of-stroke detection with a **normally open (NO) or normally closed (NC) contact configuration**, allowing for seamless integration into control systems for safety interlocks, position verification, or process automation. These switches are engineered for durability, featuring **IP65-rated protection** against dust, dirt, and moisture, ensuring reliable operation in harsh factory environments. The **T3H switches** are mounted directly to the slide table s frame, offering a compact yet robust solution that minimizes installation complexity while maximizing responsiveness. The pneumatic cylinder driving the slide table operates with **standard air pressure (typically 6 8 bar)**, delivering a powerful yet energy-efficient stroke with adjustable speed control via an integrated **quick-exhaust valve**, allowing operators to fine-tune acceleration and deceleration for optimal cycle times and reduced wear on connected components.

Constructed from **high-strength steel**, the slide table s base and carriage are designed for **rigorous industrial use**, with **pre-hardened guideways** that have been precision-ground to ensure smooth, backlash-free movement. The **P73 model s dual-guide configuration** distributes load evenly, preventing deflection and maintaining alignment even under high dynamic forces. Additionally, the table s **modular design** allows for easy customization, including the addition of **side rails, mounting brackets, or auxiliary components** such as linear bushings or magnetic encoders for enhanced positioning feedback. The **T3H limit switches** are wired with **shielded cables** and feature **adjustable stroke sensitivity**, enabling precise tuning to match specific application requirements, whether for gentle indexing or rapid positioning tasks.

Ideal for integration into **automated production lines, CNC machining centers, packaging systems, or material transport applications**, the CKD STSB-1620-P73 slide table offers a **versatile, high-performance solution** that balances strength, precision, and ease of maintenance. Its **pneumatic drive system** ensures quick response times and consistent force output, while the **hardened steel guides** guarantee long-term reliability in environments where precision and durability are non-negotiable. Whether used in **light-duty assembly tasks or heavy-duty material handling**, this slide table delivers **repeatable accuracy, minimal downtime, and seamless compatibility** with existing control systems, making it a standout choice for engineers and manufacturers seeking a dependable linear motion solution.

**Pros and Cons of buying a CKD STSB-1620-P73 Guided Air Cylinder Slide Table with T3H Limit Switches**

### **Pros**

1. **Precision and Stability** The guided air cylinder design ensures smooth, linear motion with minimal play, making it ideal for applications requiring accuracy in positioning or indexing. The slide table s rigid construction reduces vibration and backlash, which is critical for repetitive tasks.

2. **High Load Capacity** With a load capacity of 1,620 kg (16.2 tons), this slide table is suitable for heavy-duty applications, including material handling, assembly lines, or machining operations where stability under load is essential.

3. **Versatility in Integration** The T3H limit switches provide programmable positioning control, allowing for automated start/stop, end-of-travel detection, and synchronization with other machinery. This makes it adaptable to CNC systems, robotic arms, or custom automation setups.

4. **Durability and Longevity** Constructed from high-quality materials (likely steel or reinforced aluminum), this slide table is built for industrial use, offering resistance to wear, corrosion, and fatigue over extended periods. The air cylinder s pneumatic operation also reduces maintenance compared to hydraulic systems.

5. **Quick and Easy Installation** The modular design and standard mounting interfaces simplify integration into existing production lines. Pre-installed limit switches and air connections streamline setup, reducing downtime during installation.

6. **Energy Efficiency** Pneumatic systems are generally more energy-efficient than hydraulic ones, especially for intermittent or low-speed operations. The air cylinder s responsiveness also allows for rapid cycling, improving throughput in automated processes.

7. **Safety Features** The inclusion of limit switches enhances safety by preventing over-travel, which can damage equipment or injure operators. Additional safety options (e.g., emergency stops) can often be added later if needed.

8. **Compatibility with Automation** Works seamlessly with PLCs, CNC controls, or industrial robots, making it a flexible component for modern manufacturing environments. The slide table s repeatability ensures consistency in automated processes.

9. **Minimal Maintenance** Pneumatic systems require less lubrication and have fewer moving parts prone to failure compared to mechanical or hydraulic alternatives. Regular air filter maintenance and occasional lubrication of guide rails are typically the only upkeep required.

10. **Cost-Effective for High-Volume Use** While the initial investment may be higher than simpler mechanical solutions, the durability and efficiency of this slide table can reduce long-term operational costs, especially in high-volume or continuous production settings.

---

### **Cons**

1. **High Initial Cost** Compared to basic mechanical slides or lower-capacity pneumatic systems, this slide table represents a significant upfront investment. Smaller businesses or startups with limited budgets may find it prohibitive.

2. **Dependence on Compressed Air Supply** Pneumatic systems require a reliable and properly maintained air compressor. Fluctuations in air pressure or supply interruptions can halt operations, necessitating backup solutions (e.g., accumulators) for critical applications.

3. **Space Requirements** The slide table s size (1,620 kg capacity suggests a substantial frame) may not fit in compact workspaces. Layout planning is essential to ensure proper installation without obstructing workflows.

4. **Noise and Vibration** Pneumatic cylinders can generate audible noise during operation, which may be problematic in quiet or sensitive environments. Vibration from rapid movements could also affect delicate components or nearby machinery.

5. **Temperature Sensitivity** Extreme temperatures can affect the performance of pneumatic seals and lubricants, potentially leading to slower response times or increased wear. Environmental controls may be necessary in harsh conditions.

6. **Skill Dependency** Proper installation, calibration, and maintenance require technical expertise. Misalignment or improper setup can lead to premature wear or failure, so training may be needed for operators or maintenance staff.

7. **Limit Switch Reliability** While the T3H limit switches are robust, their performance depends on cleanliness and proper wiring. Dust, debris, or electrical issues could cause false triggers or failures, requiring regular inspection.

8. **Limited Customization for Non-Standard Applications** If the slide table s stroke length, mounting points, or control interfaces don t align perfectly with your application, modifications may be costly or time-consuming.

9. **Potential for Air Leaks** Over time, seals and connections in pneumatic systems can degrade, leading to air leaks. This not only wastes energy but can also reduce the system s responsiveness if pressure drops.

10. **Resale Value** Specialized industrial equipment like this slide table may have a lower resale value compared to more universal or modular components. Depreciation should be factored into long-term cost analysis.

---

### **Conclusion**

The **CKD STSB-1620-P73 guided air cylinder slide table with T3H limit switches** is a high-performance, durable solution ideal for heavy-duty, precision-driven applications in manufacturing, automation, or material handling. Its strengths lie in its load capacity, stability, compatibility with automation, and low maintenance requirements, making it a sound investment for industries prioritizing efficiency and reliability.

However, the **high upfront cost, dependence on compressed air, and potential space or noise constraints** may not suit all applications. It is best suited for:

- **High-volume production lines** where repeatability and load capacity are critical.

- **Automated or CNC-integrated systems** requiring precise positioning.

- **Industrial environments** with stable air supply and maintenance infrastructure.

For **small-scale, low-budget, or non-industrial applications**, a simpler mechanical slide or a lower-capacity pneumatic system might be more practical. Always conduct a **cost-benefit analysis**, considering factors like operational volume, space constraints, and long-term maintenance, before purchasing.

### **Recommendation**

- Your application demands **high load capacity (1,620 kg) and precision motion**.

- You are integrating it into an **automated or CNC-controlled system** where limit switches and repeatability are essential.

- Your facility has **reliable compressed air supply** and can accommodate the slide table s size.

- Long-term **durability and low maintenance** outweigh the initial cost for your production needs.

- Your budget is **limited**, and a lower-capacity or mechanical solution would suffice.

- Your workspace lacks **proper ventilation or space** for the slide table.

- You lack **technical expertise** for installation and maintenance.

- Your operations are **intermittent or low-volume**, making the investment less cost-effective.

For optimal performance, pair this slide table with **proper air filtration, regular lubrication of guide rails, and calibration of limit switches**. Consulting with CKD s technical support or a local automation specialist can also help tailor the setup to your specific requirements.

Details:

Shipping Costs. We completely understand that many of our automation products take a considerable amount time and effort to implement into machine or fully test can often offer longer return time/testing period if necessary. Depending on the size of item there may be a pelleting/crating fee. They include T3H limit switches as shown.

All 7 are included as shown. Knowledgeable, staff. Here is a lot of 7 CKD STSB-1620-P73 slide table air cylinders. Industrial, quality.

Capabilities. These are in excellent functional and cosmetic shape. Fast, shipping. This fee will vary depending on the size of item.

7 CKD STSB-1620-P73 Guided Air Cylinder Slide Table T3H Limit Switches. Turnaround Time. Next Day Shipping.

part #: stsb1620p73 price

• $95.00

specifications hydraulicylind:

• brand: Ckd
• mpn: Stsb-1620-p73
• part type: Switch Cylinder Slide Table
• bore diameter: 16mm
• cylinder action: Double-acting
• cylinder type: Slide Table Air Cylinder
• stroke length: 20mm
• suitable media: Compressed Air

shipping hydraulicylind:

• class: Standard, One-day
• type: Calculated
• carrier: UPS, USPS
• cost: $0.00
• transit: 2-6 Days
• service: UPS Ground, UPS Next Day Air, USPS Ground Advantage

offer hydraulicylind:

• quantity: 1
• best offers: True
• options: Ship-to-home
• started: February 26, 2026
• sold: 0
• availability: In Stock

returns hydraulicylind:

• method: Money back
• policy: Returns Accepted
• paid by: Buyer
• time: 30 Days

seller hydraulicylind:

• city: Laporte, Colorado
• # reviews: 20859
• rating: 100.0%

payments hydraulicylind:

• wallet: Apple-pay
• other
• credit card: Visa

general hydraulicylind:

• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Cylinders
• condition: Used

Ckd STSB-1620-P73 Is Similar To:

• 3002e-3c Ckd Air Lubracator (20.6% similar) These are typically larger items. Some exceptions may apply...(March 19th, 2019)
• Abp-12 Ckd Air Booster (28.3% similar) These are typically larger items. Ckd ABP-12 air booster 9AM-3PM PO. Some exceptions may apply...(March 19th, 2019)
• Cacf-qh-fc50-75-fl248799 Ckd Corporation Pneumatic Cylinder Fnip (23.9% similar) Join our subscribe to news letter for exclusive discounts and special offers. Special instructions. Ckd corporation CACF-QH-FC50-75-FL248799 pneumatic cylinder nip manufactured by manufacturer part number: a new product without its original packing...(October 29th, 2018)
• Stlmc-50250 Ckd New Pneumatic Slide 50 Mm Bore X 250 Stroke (34.1% similar) ...(April 23rd, 2016)
• Ckd Str2-b-16-30-k0h Slide Cylinder (47.6% similar) Ckd STR2-B K0H-H...(November 7th, 2018)
• Cma2-20 Ckd Cylinder Fast Shipping (34.6% similar) For next day air or faster shipping please. Standard shipping is USPS priority mail or ups ground...(November 22nd, 2017)
• Cma2-fa-40-50 Ckd Pneumatic Cylinder W (29.6% similar) 81 Ckd r3 SWITCHES:3 wire non proximity type power red. 188MM 100PSI lbs push pull 14 shaft minus. 89 shaft size. 92 body dia ma. 5 shaft threads pf 23 lbs specs: cylinder total length retracted. 14 body length mount face. Not in original packaging I pack everything very well to prevent damage. ...(January 10th, 2018)
• Cmk2-32-100 Ckd Pneumatic Cylinder Switches Kit (41% similar) 5 nuts specs: cylinder power factor 7 body length including mounting threads retracted led. 170MM Ckd CMK2 pneumatic cylinder w 2 r2 switches 1MPA 145PSI 1/8 RC pt ports front and rear mounting kit includes brackets 26MM x 22 100PSI lbs push pull 12MM shaft. On - light power factor woodcocks load ...(June 9th, 2018)
• Cmk2-32-50-p6 Ckd Pneumatic Cylinder W-switches (39.3% similar) 5 shaft threads. Ckd CMK2 p6 pneumatic cylinder w 2 r3 non switches 32MM bore 50MM stroke 1 map 145PSI power factor. 3 total length extended. 120MM 97 total length retracted mm mm thread. I pack everything very well to prevent damage. 725 body dia. Woodcocks load voltage . 152MM 6 body length...(January 10th, 2018)
• Cmk2-c-32-25 Ckd Pneumatic Cylinder Mpa New (33.6% similar) I have made an honest and fair evaluation of this item, but am only human. No warranty beyond that. Ckd pneumatic cylinder pic: lock: Sr DH8 catalog number: CMK2-C range. It will work when arrives. But, buyer pays actual shipping cost for items sent via ups or fed ex. I do miss things occasionally, ...(May 15th, 2018)
• Cmk2-c-32-300 Ckd Air Cylinder (32% similar) New Ckd-c air cylinder with built in flow controls and mounting hardware. 32MM bore with a 300MM stroke...(March 18th, 2018)