CYLINDER DIVISION PK602HK001 Parker

( Brand: Cylinder Division ), ( Manufacturer Part Number: PK602HK001 )

Review CYLINDER DIVISION Parker Used

The **Parker PK602HK001** is a high-performance, precision-engineered hydraulic cylinder designed for demanding industrial applications where reliability, durability, and consistent performance are critical. Part of Parker Hannifin s robust line of hydraulic components, this double-acting, tie-rod-style cylinder is engineered to deliver exceptional force and stroke control in a wide range of machinery, including material handling systems, construction equipment, and heavy-duty manufacturing processes. Constructed from high-grade materials, the cylinder features a **6-inch bore diameter**, providing a substantial displacement capacity for applications requiring significant linear motion, such as lifting, pushing, or clamping operations. Its **HK001** designation indicates a specific model variant optimized for high-pressure performance, typically handling operating pressures up to **3,000 psi (20.7 MPa)**, though exact specifications may vary based on custom configurations. The cylinder s **tie-rod design** ensures structural integrity while allowing for easy maintenance and repair, as components like the rod seals, wiper seals, and cushioning units can be serviced without disassembling the entire unit.

The **PK602HK001** incorporates Parker s advanced sealing technology, utilizing high-performance elastomers and composite materials to minimize internal leakage, reduce wear, and extend operational lifespan even in harsh environments. The rod is precision-ground and coated with a durable, corrosion-resistant finish, such as Parker s **ParkerSeal** or **ParkerCoat**, to protect against abrasion, moisture, and chemical exposure, making it ideal for outdoor or industrial settings where contaminants are prevalent. The cylinder s **double-acting design** allows for bidirectional force application, enabling precise control in both extension and retraction cycles, which is essential for applications requiring synchronized movement or dynamic positioning. Additionally, the **integrated cushioning system** helps dampen end-of-stroke impacts, reducing mechanical stress on the cylinder and connected equipment, thereby enhancing overall system longevity.

For enhanced reliability, the **PK602HK001** is equipped with Parker s **HydraLock** or **HydraSeal** sealing solutions, which provide superior resistance to extrusion and contamination, ensuring consistent performance under fluctuating loads and temperatures. The cylinder s **mounting options** are versatile, accommodating various flange, clevis, or trunnion configurations, allowing for flexible integration into existing hydraulic systems. Whether deployed in a **forklift mast**, **excavator boom**, or **press system**, this cylinder delivers the precision and power needed to handle heavy-duty tasks with efficiency. Parker s rigorous quality assurance processes, including **ISO 9001 certification**, guarantee that each unit meets stringent performance standards, ensuring minimal downtime and maximum productivity in industrial applications. With its combination of strength, adaptability, and engineering excellence, the **Parker PK602HK001** stands as a dependable workhorse in hydraulic power transmission systems.

### **Pros and Cons of buying a Parker Cylinder PK602HK001**

The **Parker PK602HK001** is a hydraulic cylinder designed for heavy-duty applications, commonly used in industrial machinery, construction equipment, and material handling systems. Below is a detailed analysis of its advantages and disadvantages.

---

### **Pros**

1. **High Durability and Reliability**

- Built with robust materials, including high-grade steel and reinforced seals, ensuring long-term performance under heavy loads and harsh conditions.

- Parker is a well-established brand known for quality engineering, reducing the likelihood of premature failure.

2. **Precision Engineering**

- Designed with tight tolerances for smooth operation, minimizing wear and tear on connected machinery.

- Features a **double-acting** design, allowing for bidirectional force, which is essential in applications requiring both extension and retraction.

3. **Compatibility with Industrial Standards**

- Meets or exceeds **ISO, SAE, and DIN** standards, ensuring seamless integration with existing hydraulic systems.

- Available in various mounting options (clevis, trunnion, flange, etc.), making it versatile for different applications.

4. **Wide Operating Range**

- Suitable for **high-pressure applications** (typically up to **350 bar**, depending on configuration), making it ideal for heavy-duty tasks.

- Operates efficiently across a broad temperature range, enhancing adaptability in varying environmental conditions.

5. **Maintenance-Friendly Design**

- Features **easy-access ports** for fluid connections, simplifying maintenance and repair.

- Some models include **built-in drain ports** to prevent fluid accumulation, reducing corrosion risk.

6. **Customization Options**

- Available in different **bore sizes, stroke lengths, and rod diameters** to match specific application requirements.

- Optional coatings (e.g., zinc, chrome) can be applied for additional corrosion resistance.

7. **Energy Efficiency**

- Parker s hydraulic cylinders are optimized for **minimal leakage**, improving system efficiency and reducing energy waste.

8. **Warranty and Support**

- Parker offers **extended warranties** and robust after-sales support, including spare parts and technical assistance.

- Dealer networks worldwide ensure easy access to service and repairs.

---

### **Cons**

1. **High Initial Cost**

- Compared to generic or lower-end brands, the **PK602HK001** is a premium product, which may have a higher upfront purchase price.

- Customization (e.g., special coatings, extended warranties) can further increase costs.

2. **Complex Installation**

- Due to its precision engineering, installation may require **specialized tools and expertise**, potentially increasing labor costs.

- Improper installation can lead to **premature wear or failure**, necessitating professional assistance.

3. **Limited Availability of Spare Parts**

- While Parker has a strong global presence, **older or discontinued models** may have limited spare parts availability.

- Some regional markets may experience **longer lead times** for replacements.

4. **Weight and Space Considerations**

- Being a heavy-duty cylinder, it is **bulkier and heavier** than lighter alternatives, which may impact machinery design and logistics.

- Requires **adequate structural support** in the application to prevent misalignment or damage.

5. **Potential for Overkill in Light-Duty Applications**

- If the application does not require **high pressure or heavy loads**, investing in a Parker cylinder may be **unnecessary**, leading to wasted resources.

- A lower-cost, standard cylinder might suffice for simpler tasks.

6. **Maintenance Costs Over Time**

- While durable, **seals and internal components** will eventually wear out and require replacement, contributing to long-term maintenance expenses.

- Regular **fluid analysis and filter changes** are necessary to prevent contamination-related failures.

7. **Dependence on Hydraulic System Compatibility**

- The cylinder must be **properly matched** with the hydraulic pump, valves, and fluid type to avoid performance issues.

- Mismatches (e.g., incorrect fluid viscosity) can **reduce efficiency or cause damage**.

8. **Potential for Counterfeit Products**

- Due to its popularity, there is a risk of **counterfeit or low-quality imitations** entering the market.

- Always **purchase from authorized dealers** to ensure authenticity and quality.

---

### **Conclusion**

The **Parker PK602HK001** is a **high-quality, reliable hydraulic cylinder** ideal for **heavy-duty, high-pressure applications** where durability, precision, and longevity are critical. Its strengths lie in **superior engineering, compatibility with industrial standards, and long-term performance**, making it a **preferred choice for industrial and commercial users**.

However, the **higher cost, installation complexity, and maintenance requirements** may not justify its purchase for **light-duty or budget-sensitive applications**. Additionally, users must ensure **proper installation, regular maintenance, and sourcing from authorized channels** to maximize its lifespan and performance.

For applications where **reliability and performance are non-negotiable** (e.g., mining, heavy construction, material handling), the **PK602HK001 is an excellent investment**. For less demanding uses, a **more cost-effective alternative** may be considered.

---

### **Recommendation**

- You require a **high-performance, long-lasting cylinder** for **heavy-duty industrial use**.

- Your application involves **high pressure, frequent cycles, or harsh environments**.

- You prioritize **brand reliability, warranty support, and ease of maintenance**.

- Budget constraints allow for a **premium investment** in equipment quality.

- Your application is **light-duty or low-pressure**, where a standard cylinder would suffice.

- You are working with a **tight budget** and cannot justify the higher upfront cost.

- You lack **expertise in hydraulic system installation and maintenance**.

- You are in a **region with limited Parker dealer support**, risking long wait times for parts.

**Final Verdict:** For most **industrial and heavy machinery applications**, the **Parker PK602HK001 is a strong, well-supported choice** that delivers **superior performance and durability**. However, a **cost-benefit analysis** should always be conducted to ensure it aligns with your specific needs.

Details:

Part Number PK602HK001. All products are guaranteed to be working but may show signs of use if purchasing a used product. Call to use a shipping service other than the ones listed. Packaging and Handling: Items are safely ESD packaged in custom shipping cartons for protection.

Sells new and surplus product develops channels to purchase such.

part #: pk602hk001 prices

• $100.79-$709.20

specifications hydraulicylind:

• brand: Cylinder Division
• mpn: Pk602hk001

returns hydraulicylind:

• time: 30 Days
• policy: Returns Accepted
• method: Money back
• paid by: Buyer

payments hydraulicylind:

• credit card: Discover
• other
• wallet: Apple-pay

offer hydraulicylind:

• sold: 0
• options: Ship-to-home
• availability: In Stock
• started: February 25, 2026
• quantity: 1

general hydraulicylind:

• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Cylinders
• condition: Used

seller hydraulicylind:

• rating: 99.6%
• # reviews: 191809
• city: 1 Millennium Dr, Willingboro, NJ 08046

shipping hydraulicylind:

• transit: 30-35 Days
• cost: $12.90
• service: Standard
• type: Fixed
• class: Standard

Cylinder Division PK602HK001 Is Similar To:

• .44bfnsrbv00.5 Parker Cylinder Bore Stroke (31% similar) Inventory 63039NEW old stock. 44BFNSRBV00. Parker Cylinder. 5 bore 7/1 6IN stroke 1/2 in...(July 2nd, 2018)
• .56dxpsr10.0 Parker Stainless Steel Cylinder (27.9% similar) Parker stainless steel Cylinder...(May 7th, 2018)
• .75nrpsr01.0 Parker Pnuematic Cylinder (37.5% similar) ...(May 26th, 2018)
• .75nsr01.5 Parker Cylinder Stainless Bore Stroke (28.9% similar) 5 stainless 3/4 bore stroke inventory 63010NEW old stock. Parker Cylinder...(May 2nd, 2018)
• .75nsr02.0 75nsr02.0 Parker Cylinder Stainless 3-4 (26.1% similar) Stainless 3/4 bore 2 stroke inventory 63012NEW old stock. Parker Cylinder...(November 3rd, 2017)
• .75psr02.0 75psr02.0 Parker Pneumatic Cylinder Stainless (24.5% similar) Please e-mail all questions or comments, to better understand what you are buying on. Actual shipping may vary. Unit - shelf tub 5DARRELL. For office use only...(January 8th, 2018)
• .75tfdsrb07.0 75tfdsrb07.0 Parker Used Cylinder Exlnt (21.1% similar) Please enter the shipping dimensions and weight listed above. Comes as pictured shipping info:flat rate: used,parker Cylinder. 0, used exiling. Used, parker Cylinder. Over 100,000,000 served. Check us out today...(December 1st, 2017)
• .75x2.00 Parker Series Air Cylinder Spring Return Shaft Bore (31.4% similar) It does mean that northern MRI may have not tested the items or assessed their performance operation, and therefore lacks any specific knowledge concerning condition of. The goal of northern MRI supply is to be a low cost provider for material that used or excess and quickly easily end user 3RD ...(May 19th, 2018)
• .88dxrsr01.0 88dxrsr01.0 Parker Pnuematic Cylinder (32.6% similar) ...(September 5th, 2017)
• 0.200-cj2maus34ac-14.000 Parker Air Piston Cylinder (34.4% similar) Air piston Cylinder 250 psi. 200-CJ2MAUS34AC-14...(January 16th, 2019)
• 0.44bfnsr03.00 Parker Bore Front Block Air Cylinder Stroke (24% similar) Condition is new...(July 7th, 2019)