SMC NCMB106-0150-97224CDN Hydraulic Pneumatic Cylinders

( Brand: Smc ), ( Manufacturer Part Number: NCMB106-0150-97224CDN ), ( Part Type: Hydraulic Pneumatic Cylinder )

Review SMC Ncmb106015097224cdn Used

The **SMC NCMB106-0150-97224CDN** (also referenced as **NCMB106015097224CDN**) is a high-performance, compact solenoid valve designed for precision control in industrial automation, fluid handling, and pneumatic systems. This normally closed (NC) direct-acting valve is engineered with a robust stainless steel body and a durable brass or stainless steel internal construction, ensuring exceptional resistance to corrosion, wear, and pressure fluctuations. The valve operates on a 24V DC signal, making it ideal for integration with PLCs, control panels, and other low-voltage automation systems, while its compact footprint allows for efficient installation in tight spaces. Featuring a **1/4-inch NPT (National Pipe Thread) female connection**, it accommodates a wide range of fluid media, including air, water, oil, and mild chemicals, with a maximum working pressure of **10 bar (145 psi)** and a flow rate of up to **150 L/min (5.3 ft /min)**, depending on the medium. The valve s **normally closed (NC) configuration** ensures that the output remains sealed until an electrical signal is applied, providing reliable shut-off and preventing unintended fluid flow. Its **pilot-operated design** minimizes power consumption while delivering rapid response times, making it suitable for applications requiring precise on-off control, such as filling systems, valve actuation, or safety interlocks. The **CDN designation** indicates a specific variant optimized for clean, dry air or non-corrosive gases, further enhancing its reliability in demanding environments. With its **IP65-rated enclosure**, the valve offers protection against dust and low-pressure water jets, ensuring durability in both indoor and outdoor applications. Whether used in manufacturing, packaging, or laboratory settings, the SMC NCMB106-0150-97224CDN delivers consistent performance, quiet operation, and long-term reliability, making it a trusted component in modern automation systems.

**Pros and Cons of buying a SMC NCMB106-0150-97224CDN (or NCMB106015097224CDN) Solenoid Valve**

### **Overview**

The SMC NCMB106-0150-97224CDN is a **2-way, normally closed (NC) pneumatic solenoid valve** designed for general-purpose air control applications. It is part of SMC s NCMB series, which is widely used in automation, packaging, and industrial machinery. Below is a detailed analysis of its advantages and limitations.

---

### **Pros**

1. **Reliability and Durability**

- SMC is a well-established manufacturer known for high-quality pneumatic components. This valve is built with robust materials, including stainless steel and durable seals, ensuring long-term performance in demanding environments.

- The design minimizes wear and tear, reducing the likelihood of frequent failures, especially in clean or controlled environments.

2. **Compact and Space-Efficient**

- The valve s compact size (106 series) makes it suitable for applications where space is limited. It can be easily integrated into existing pneumatic systems without requiring significant modifications.

3. **Easy Installation and Maintenance**

- The valve features a straightforward mounting system (e.g., flange or pipe connection) and is compatible with standard pneumatic fittings. This simplifies installation and reduces downtime.

- Maintenance is minimal, primarily involving periodic inspection of seals, coils, and air filters. SMC provides clear documentation for servicing, which helps operators or technicians perform basic upkeep efficiently.

4. **Energy Efficiency**

- The valve is designed to operate with low power consumption, which can contribute to cost savings in larger systems. It also features a quick-exhaust mechanism that reduces air leakage when de-energized, improving overall system efficiency.

5. **Versatility in Applications**

- **Packaging machinery** (e.g., clamping, sealing, or product handling).

- **Automation systems** (e.g., robotic arms, conveyor systems).

- **Light industrial processes** (e.g., air cylinders for positioning or actuating components).

- The valve can handle working pressures up to **0.8 MPa (8 bar)** and flow rates suitable for moderate air consumption, making it adaptable to various setups.

6. **Compatibility with SMC s Ecosystem**

- SMC offers a comprehensive range of compatible components, such as filters, regulators, and lubricators, which can be easily integrated into the system. This interoperability simplifies procurement and reduces the risk of compatibility issues.

- The valve is part of SMC s modular design philosophy, allowing for easy upgrades or replacements if system requirements evolve.

7. **Low Noise Operation**

- Compared to some other solenoid valves, the NCMB106 series operates relatively quietly, which is beneficial in environments where noise reduction is a priority (e.g., cleanrooms or office-like settings).

8. **Cost-Effective for General Use**

- While not the most premium option on the market, the valve offers a balanced price-to-performance ratio for standard pneumatic applications. It is often more affordable than high-end brands while still delivering reliable performance.

9. **Quick Response Time**

- The valve s design ensures rapid actuation, which is critical in applications requiring precise timing or high-speed cycles. This is particularly useful in automated production lines where delays can impact throughput.

10. **Global Availability and Support**

- SMC has a strong global distribution network, making it easier to source spare parts, technical support, or replacements. This is advantageous for businesses operating in multiple regions or with supply chain dependencies.

---

### **Cons**

1. **Limited Pressure and Flow Capacity**

- The valve is rated for a maximum working pressure of **0.8 MPa (8 bar)**, which may be insufficient for high-pressure applications (e.g., heavy-duty industrial presses or high-force pneumatic systems). For such cases, larger or specialized valves (e.g., SMC s NCMB206 series) would be required.

- The flow rate is moderate, meaning it may not be ideal for systems with very high air demand or large actuators. Oversizing the valve or adding additional valves in parallel might be necessary for high-volume applications.

2. **Coil Sensitivity to Electrical Conditions**

- The solenoid coil is sensitive to voltage fluctuations, power surges, or poor-quality power supplies. In environments with unstable electrical grids, additional protection (e.g., surge suppressors or voltage regulators) may be needed to prevent coil damage or premature failure.

- The valve requires **24V DC or 110V/220V AC**, depending on the model variant. Mismatched voltage can lead to overheating or failure.

3. **Seal Wear Over Time**

- Like all pneumatic valves, the internal seals (e.g., rubber or elastomeric components) are subject to wear, especially in environments with contaminated air (e.g., dust, moisture, or oil particles). Regular inspection and replacement of seals may be required to maintain performance.

- In harsh conditions (e.g., high humidity or chemical exposure), the valve s lifespan may be shortened unless additional protective measures (e.g., air filters or lubrication) are implemented.

4. **Limited Customization Options**

- The NCMB106 series is a standard product with limited customization. Users requiring specialized features (e.g., specific mounting orientations, custom wiring, or unique pressure ratings) may need to explore other models or work with SMC s engineering team for modifications, which can add cost and lead time.

- The valve does not support advanced features like built-in diagnostics or wireless communication, which are available in higher-end models.

5. **Potential for Air Leakage**

- While the valve is designed to minimize leakage, some air may escape when de-energized, particularly if the seals degrade over time. This can lead to inefficiencies in the pneumatic system and may require periodic tightening of connections or seal replacements.

6. **Dependence on Clean Air Supply**

- The valve performs best with clean, dry, and oil-free compressed air. In systems where the air supply is contaminated (e.g., with moisture, oil, or particles), additional filtration and drying equipment (e.g., SMC s filters or dryers) are necessary. This adds to the overall system cost and complexity.

7. **Limited Temperature Range**

- The valve is typically rated for operating temperatures between **-10 C and 60 C (-14 F to 140 F)**. In extreme temperature environments (e.g., refrigerated storage or high-heat industrial settings), performance may be compromised, or additional heating/cooling measures may be required.

8. **No Built-in Fail-Safe Mechanisms**

- The valve is normally closed (NC) by default, which is a safety feature in many applications. However, in case of power failure or coil failure, the valve will remain closed, which may not be ideal for all safety-critical applications. Users must design their systems accordingly, possibly incorporating backup power or redundant valves.

9. **Potential for Noise in High-Flow Applications**

- While generally quiet, the valve can produce noticeable noise during rapid cycling or when handling higher flow rates. In sensitive environments, this may require additional sound-dampening measures.

10. **Learning Curve for Non-Experts**

- While the valve is user-friendly, setting up a pneumatic system especially for those unfamiliar with compressed air technology can be challenging. Proper installation, wiring, and troubleshooting may require technical expertise to avoid common pitfalls (e.g., incorrect pressure settings, improper sealing, or electrical issues).

---

### **Conclusion**

The **SMC NCMB106-0150-97224CDN** solenoid valve is a **reliable, compact, and cost-effective solution** for general-purpose pneumatic applications. Its strengths lie in its **durability, ease of installation, compatibility with SMC s ecosystem, and versatility** for moderate-pressure and moderate-flow systems. It is particularly well-suited for **automation, packaging, and light industrial applications** where space efficiency and simplicity are priorities.

However, it is **not ideal for high-pressure, high-flow, or extreme-environment applications** without additional modifications or supporting equipment. The valve s performance is also dependent on **clean air supply, stable electrical conditions, and proper maintenance**, which may add complexity to some setups.

For users seeking **higher performance, advanced features, or customization**, SMC offers other models (e.g., NCMB206 series or NCMB with built-in diagnostics). Alternatively, brands like **Festo, ASCO, or Parker** may provide alternatives with different feature sets depending on specific needs.

---

### **Recommendation**

- You need a **reliable, compact, and easy-to-install** solenoid valve for **general pneumatic applications**.

- Your system operates within the valve s **pressure (0.8 MPa) and flow rate limits**.

- You are using **clean, dry compressed air** and have a **stable electrical supply**.

- You prioritize **cost-effectiveness and compatibility with SMC s existing components**.

- Your application does not require **high-speed cycling, extreme temperatures, or advanced diagnostics**.

- You require **higher pressure or flow rates** (e.g., SMC NCMB206 series or larger valves).

- Your environment has **contaminated air, extreme temperatures, or unstable power**

Details:

Sells new and surplus product develops channels to purchase such. Call to use a shipping service other than the ones listed. Packaging and Handling: Items are safely ESD packaged in custom shipping cartons for protection. All products are guaranteed to be working but may show signs of use if purchasing a used product.

part #: ncmb106015097224cdn price

• $19.16

specifications hydraulicylind:

• brand: Smc
• mpn: Ncmb106-0150-97224cdn
• part type: Hydraulic Pneumatic Cylinder

offer hydraulicylind:

• options: Ship-to-home
• started: March 1, 2026
• availability: In Stock
• sold: 0
• quantity: 1

general hydraulicylind:

• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Cylinders
• condition: Used

shipping hydraulicylind:

• transit: 22-34 Days
• class: Standard
• type: Fixed
• cost: $12.90
• service: Standard

returns hydraulicylind:

• method: Money back
• paid by: Buyer
• policy: Returns Accepted
• time: 30 Days

seller hydraulicylind:

• # reviews: 192448
• rating: 99.6%
• city: 1 Millennium Dr, Willingboro, NJ 08046

payments hydraulicylind:

• other
• wallet: Google-pay
• credit card: Discover

Smc NCMB106-0150-97224CDN Is Similar To:

• Cba1fn63-175-hl Smc Pneumatic Cylinder Used (27.4% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(April 19th, 2018)
• Cdpx2n15-125b Smc Guided Cylinder Used (26.7% similar) Items are usually shipped USPS or FedEx ground...(January 14th, 2019)
• Cdq2b100-50dm Smc Pneumatic Cylinder Bore Stroke Used (24.8% similar) Using the ask a question link at end of this item or by ING on our username surplus and there. The cost of combined shipping depends on weight, location buyer and size box. Prices for these options may differ from standard ground shipping. Condition: used Smc CDQ2B100-50DM pneumatic cylinder, 100MM ...(June 15th, 2018)
• Cdq2b100d-j7476-xc11 Smc Pneumatic Cylinder Used (26% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(March 5th, 2018)
• Cdq2b25-15dz Smc Compact Cylinder Used (28.9% similar) Sensors included. D-M9P Smc sensors make offer I4. These components worked when removed...(February 16th, 2019)
• Cdq2b50-100dm Smc Pneumatic Cylinder Bore Stroke With Magnet Used (22.2% similar) Smc CDQ2B50-100DM pneumatic cylinder, 50MM bore 100MM stroke with magnet. If you require an alternate shipping method, please using the ask a question link at end of item. Using the ask a question link at end of this item or by ING on our username surplus and there. Condition: used name plate wore ...(May 2nd, 2018)
• Cdq2b80-75dm Smc Pneumatic Cylinder Bore Stroke Used (25% similar) Prices for these options may differ from standard ground shipping. The cost of combined shipping depends on weight, location buyer and size box. Using the ask a question link at end of this item or by ING on our username surplus and there. If you require an alternate shipping method, please using ...(June 15th, 2018)
• Cdq2d25-40dm-f7pl Smc Pneumatic Cylinder Used (26.8% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(May 20th, 2018)
• Cdq2kwb25-20d Smc Cylinder Used (26.5% similar) Used, but in good working condition. For expedited shipping options. Smc cylinder CDQ2KWB25-20D condition: new, in box no old inventory used, but good working condition. Some exceptions may apply...(October 9th, 2018)
• Cdq2l16-10d Smc Compact Cylinder Used (29.2% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(January 23rd, 2018)
• Cg1gn40-500 Smc Used Cg1ba40-500-bb6 (18.2% similar) Looks new with minor defects. Barely used...(July 19th, 2017)