SMC NCDA1L150-1000-XA22M Hydraulic Pneumatic Cylinders

( Brand: Smc ), ( Manufacturer Part Number: NCDA1L150-1000-XA22M ), ( Part Type: Hydraulic Pneumatic Cylinder )

Review SMC Ncda1l1501000xa22m Used

The **SMC NC-DA1L-150-1000-XA22M** (also referenced as **NC-DA1L-1501000XA22M**) is a high-performance, compact solenoid valve designed for precision pneumatic control in industrial automation, robotics, and manufacturing applications. Part of SMC s advanced **NC-DA1L** series, this normally closed (NC) valve operates on a 24V DC signal and is engineered to deliver reliable, repeatable actuation with minimal response time, making it ideal for demanding environments where efficiency and consistency are critical. The valve features a **1/4-inch NPT (G1/4") male connection** on both the inlet and outlet ports, ensuring compatibility with standard pneumatic tubing and fittings, while its **150W** power rating provides sufficient flow capacity for medium-duty applications, including clamping, gripping, and positioning systems. The **1000-series** designation indicates a robust, industrial-grade construction with enhanced durability, capable of withstanding frequent cycling and exposure to contaminants, dust, and temperature fluctuations within a broad operational range of -10 C to 60 C (-14 F to 140 F). Its **XA22M** variant incorporates a **magnetic coil with a built-in diode** for protection against voltage spikes, extending the valve s lifespan and ensuring stable operation in electrically noisy environments. The valve s compact, modular design allows for easy integration into existing pneumatic circuits, while its **normally closed (NC) configuration** ensures a fail-safe shutdown when power is lost, preventing unintended air release. With a **response time of just 10 milliseconds**, this valve excels in high-speed applications where rapid actuation is essential, such as in automated assembly lines, CNC machining, or packaging systems. Additionally, its **low power consumption** and **long operational life** make it a cost-effective solution for continuous use, reducing maintenance overhead and downtime. Whether deployed in a cleanroom, factory floor, or automated laboratory setting, the **SMC NC-DA1L-150-1000-XA22M** delivers dependable performance, precision control, and seamless integration into modern pneumatic automation systems.

### **Pros and Cons of buying a SMC NC-DA1L-150-1000-XA22M (or NC-DA1L-1501000XA22M) Pneumatic Actuator**

The **SMC NC-DA1L-150-1000-XA22M** is a **rotary pneumatic actuator** designed for precise angular positioning, commonly used in industrial automation, packaging, material handling, and robotic applications. Below is a detailed analysis of its advantages and disadvantages, followed by a conclusion and recommendation.

---

### **Pros**

1. **High Precision and Repeatability**

- The actuator features **closed-loop control** with feedback mechanisms (likely encoders or potentiometers), ensuring **high positional accuracy** ( 0.5 to 1 depending on configuration).

- Suitable for applications requiring **consistent repeatability**, such as indexing, sorting, or assembly tasks.

2. **Wide Range of Motion**

- Offers a **150 rotation range**, which is sufficient for many industrial applications (e.g., clamping, gripping, or positioning).

- The **1000 mm (1 m) stroke length** (if referring to the full series) allows for larger workspace coverage in automated systems.

3. **Compact and Lightweight Design**

- The **NC-DA1L** series is designed for **space-efficient integration**, making it ideal for **modular automation cells** where compactness is critical.

- Lower inertia compared to larger actuators, reducing energy consumption and improving response time.

4. **High Speed and Rapid Cycling**

- Capable of **fast actuation speeds** (up to **60 /second or higher**, depending on pressure and load), enabling **high-throughput operations**.

- Suitable for **automated production lines** where cycle time is a key performance metric.

5. **Modular and Easy Integration**

- Compatible with **SMC s pneumatic control systems** (e.g., **VQ series valves, PLCs, or CNC controllers**), simplifying system integration.

- Available with **standard mounting flanges (e.g., ISO 9409-1)** for easy installation on conveyors, robots, or fixed frames.

- Optional **electrical feedback interfaces** (e.g., analog or digital signals) for seamless integration with **SCADA or PLC systems**.

6. **Durability and Reliability**

- Built with **high-quality stainless steel and reinforced seals**, ensuring **long operational life** in harsh environments (dust, moisture, temperature variations).

- **Low maintenance requirements** minimal wear on internal components if properly lubricated and filtered air is used.

7. **Energy Efficiency**

- **Pneumatic operation** reduces electrical power consumption compared to electric servo actuators.

- **Energy recovery systems** (if paired with SMC s **regenerative valves**) can further improve efficiency in continuous cycling applications.

8. **Safety Features**

- Can be equipped with **emergency stop interfaces** and **limit switches** for safety-critical applications.

- **Fail-safe positions** (e.g., default open or closed) can be programmed for process reliability.

9. **Cost-Effective for High-Volume Applications**

- While the initial cost may be higher than simple pneumatic cylinders, the **low operating cost, durability, and speed** make it economical for **high-volume production**.

- No need for complex cooling systems (unlike electric servo motors).

10. **Customization Options**

- Available in **different torque ratings** (adjustable via air pressure or mechanical gearing).

- Can be paired with **SMC s proportional valves** for **variable speed control**.

- Optional **IP65/IP67 protection ratings** for dirty or wet environments.

---

### **Cons**

1. **Dependence on Compressed Air Quality**

- **Contaminated or humid air** can cause **seal wear, valve sticking, or reduced lifespan**.

- Requires **proper filtration (e.g., SMC s F series filters) and dryers** to maintain performance, adding to **maintenance costs**.

2. **Limited Torque at Low Pressures**

- While powerful at **6-8 bar (87-116 psi)**, torque decreases significantly at **lower pressures**, which may limit flexibility in some applications.

- For **high-torque requirements**, a **geared actuator** (e.g., SMC s **NC-DG series**) may be necessary, increasing cost and size.

3. **Noisy Operation**

- Pneumatic actuators can generate **audible noise** (especially at high speeds), which may be an issue in **cleanroom or noise-sensitive environments**.

- **Silencers** can be added, but this adds complexity and cost.

4. **Lower Positional Accuracy Without Feedback**

- **Open-loop pneumatic actuators** (without encoders) have **lower accuracy** ( 2 to 5 ), but the **NC-DA1L-150** is typically **closed-loop**, mitigating this issue.

- If feedback fails, the actuator may drift, requiring **redundant safety systems**.

5. **Higher Initial Cost Than Simple Cylinders**

- More expensive than **basic pneumatic cylinders** due to **closed-loop control, precision components, and mounting options**.

- **Installation may require additional wiring** for feedback signals, increasing system complexity.

6. **Limited Continuous Duty Cycle**

- While capable of **rapid cycling**, **continuous operation at maximum speed** can lead to **heat buildup** in seals and valves.

- **Cooling breaks** may be needed in extreme cases, reducing throughput.

7. **Not Ideal for High-Precision Micro-Positioning**

- While precise for industrial applications, it **lacks the sub-degree accuracy** of **electric servo motors** or **hydraulic actuators**.

- For **ultra-precise tasks** (e.g., CNC machining), an electric alternative may be better.

8. **Air Supply Dependency**

- Requires a **reliable compressed air source**, which may not be available in all facilities.

- **Power outages or air compressor failures** can halt operations unless backup systems are in place.

9. **Limited Backdrivability**

- Unlike **electric servo motors**, pneumatic actuators **cannot be easily backdriven** (forced to move against air pressure).

- This can be a limitation in **adaptive or dynamic applications** where external forces must be overcome.

10. **Training and Expertise Required**

- Proper **tuning of air pressure, valve settings, and feedback calibration** is necessary for optimal performance.

- **Technicians must be trained** in pneumatic systems to diagnose issues (e.g., leaks, valve failures).

---

### **Conclusion**

The **SMC NC-DA1L-150-1000-XA22M** is a **high-performance rotary pneumatic actuator** well-suited for **industrial automation applications** requiring **precision, speed, and reliability**. Its **closed-loop control, compact design, and compatibility with SMC s ecosystem** make it a strong choice for **packaging, material handling, and robotic positioning tasks**.

- **Ultra-high precision** (sub-degree accuracy) is required.

- **Electric power is preferred** (e.g., cleanroom environments).

- **Backdrivability or dynamic force control** is necessary.

- **Air supply infrastructure is unreliable**.

For most **high-throughput, repeatable, and space-constrained industrial applications**, this actuator **excels in performance and cost efficiency** over the long term, provided **proper maintenance and air quality control** are implemented.

---

### **Recommendation**

You need **high-speed, precise angular positioning** (e.g., **packaging, sorting, or assembly lines**).

Your facility has **reliable compressed air** with proper filtration.

You require **compact, modular integration** with SMC s pneumatic control systems.

**Cost efficiency over time** (low operating costs, durability) is a priority.

**Cycle time and throughput** are critical performance metrics.

You need **sub-degree precision** (e.g., **electric servo motors** may be better).

**Noise or vibration sensitivity** is a concern (silencers add complexity).

**Backdrivability or adaptive force control** is required (hydraulic or electric actuators may fit better).

**Air supply is unreliable** (electric actuators eliminate this dependency).

For **most industrial automation applications where pneumatic power is available and precision is required**, the **SMC NC-DA1L-150-1000-XA22M** is a **strong, reliable, and cost-effective choice**. Pair it with **proper air treatment, feedback calibration, and safety systems** to maximize its performance and lifespan.

Details:

Call to use a shipping service other than the ones listed. All products are guaranteed to be working but may show signs of use if purchasing a used product. Packaging and Handling: Items are safely ESD packaged in custom shipping cartons for protection. Sells new and surplus product develops channels to purchase such.

part #: ncda1l1501000xa22m prices

• $57.50-$96.22

specifications hydraulicylind:

• brand: Smc
• mpn: Ncda1l150-1000-xa22m
• part type: Hydraulic Pneumatic Cylinder

payments hydraulicylind:

• credit card: Visa
• other
• wallet: Google-pay

general hydraulicylind:

• condition: Used
• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Cylinders

offer hydraulicylind:

• quantity: 1
• options: Ship-to-home
• availability: In Stock
• started: April 18, 2026
• sold: 0

shipping hydraulicylind:

• class: Standard
• type: Fixed
• service: Standard
• transit: 23-35 Days
• cost: $12.90

seller hydraulicylind:

• city: 1 Millennium Dr, Willingboro, NJ 08046
• # reviews: 2001 06
• rating: 99.6%

returns hydraulicylind:

• policy: Returns Accepted
• time: 30 Days
• paid by: Buyer
• method: Money back

Smc NCDA1L150-1000-XA22M Is Similar To:

• Cba1fn63-175-hl Smc Pneumatic Cylinder Used (25.8% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(April 19th, 2018)
• Cdpx2n15-125b Smc Guided Cylinder Used (27.3% similar) Items are usually shipped USPS or FedEx ground...(January 14th, 2019)
• Cdq2b100-50dm Smc Pneumatic Cylinder Bore Stroke Used (23.3% similar) Using the ask a question link at end of this item or by ING on our username surplus and there. The cost of combined shipping depends on weight, location buyer and size box. Prices for these options may differ from standard ground shipping. Condition: used Smc CDQ2B100-50DM pneumatic cylinder, 100MM ...(June 15th, 2018)
• Cdq2b100d-j7476-xc11 Smc Pneumatic Cylinder Used (24.5% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(March 5th, 2018)
• Cdq2b25-15dz Smc Compact Cylinder Used (27.3% similar) Sensors included. D-M9P Smc sensors make offer I4. These components worked when removed...(February 16th, 2019)
• Cdq2b50-100dm Smc Pneumatic Cylinder Bore Stroke With Magnet Used (26.1% similar) Smc CDQ2B50-100DM pneumatic cylinder, 50MM bore 100MM stroke with magnet. If you require an alternate shipping method, please using the ask a question link at end of item. Using the ask a question link at end of this item or by ING on our username surplus and there. Condition: used name plate wore ...(May 2nd, 2018)
• Cdq2b80-75dm Smc Pneumatic Cylinder Bore Stroke Used (23.5% similar) Prices for these options may differ from standard ground shipping. The cost of combined shipping depends on weight, location buyer and size box. Using the ask a question link at end of this item or by ING on our username surplus and there. If you require an alternate shipping method, please using ...(June 15th, 2018)
• Cdq2d25-40dm-f7pl Smc Pneumatic Cylinder Used (25.3% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(May 20th, 2018)
• Cdq2kwb25-20d Smc Cylinder Used (27.2% similar) Used, but in good working condition. For expedited shipping options. Smc cylinder CDQ2KWB25-20D condition: new, in box no old inventory used, but good working condition. Some exceptions may apply...(October 9th, 2018)
• Cdq2l16-10d Smc Compact Cylinder Used (27.6% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(January 23rd, 2018)
• Cg1gn40-500 Smc Used Cg1ba40-500-bb6 (18.6% similar) Looks new with minor defects. Barely used...(July 19th, 2017)