SMC MGGLF40-200-C73 Hydraulic Pneumatic Cylinders

( Brand: Smc ), ( Manufacturer Part Number: MGGLF40-200-C73 ), ( Part Type: Hydraulic Pneumatic Cylinder )

Review SMC Mgglf40200c73 Used

The **SMC MGGLF40-200-C73 (MGGLF40200C73)** is a high-performance, compact pneumatic actuator designed for precision control in industrial automation, material handling, and packaging applications. Part of SMC s renowned **MGGLF series**, this double-acting, spring-return pneumatic cylinder features a robust **40mm bore diameter** and a **200mm stroke length**, delivering reliable linear motion with exceptional force output for its compact footprint. Engineered with a **C73 mounting style**, this actuator is optimized for versatile integration into machinery, offering flexibility in installation with its **flange-mounted design** and **standardized connection points** that accommodate a wide range of accessories, including rod seals, cushioning options, and custom end-of-stroke adjustments. The cylinder s **aluminum alloy housing** ensures a lightweight yet durable construction, reducing overall system weight while maintaining structural integrity under repeated cyclic loading. Its **double-acting operation** provides bidirectional control, allowing for precise positioning and force application in both extension and retraction phases, making it ideal for applications requiring synchronized movement, such as clamping, indexing, or feeding mechanisms.

The **MGGLF40-200-C73** incorporates SMC s advanced **sealing technology**, featuring high-performance **NBR (nitrile rubber) or EPDM (ethylene propylene diene monomer) seals** as standard options, depending on the application environment. These seals ensure minimal air leakage, extended service life, and resistance to contaminants, oils, and moisture, making the actuator suitable for both cleanroom and harsh industrial settings. The cylinder s **rod guide system** is designed to reduce friction and wear, enhancing efficiency and longevity, while its **integrated cushioning** (available in adjustable or fixed configurations) dampens impact forces at the end of stroke, protecting both the actuator and connected components from shock. For added reliability, the **MGGLF series** is equipped with **SMC s patented "Soft Start" technology**, which gradually ramps up air pressure to minimize mechanical stress during initial movement, further extending the actuator s operational lifespan.

Compatibility with SMC s **standard pneumatic fittings and control systems** ensures seamless integration into existing automation setups, whether paired with proportional valves, solenoids, or PLC-driven control modules. The **MGGLF40-200-C73** is also engineered for energy efficiency, with optimized air consumption and minimal heat generation, reducing operational costs and environmental impact. Available in various **finish options**, including powder-coated or anodized surfaces, this actuator can be customized to meet specific aesthetic or corrosion-resistant requirements. Whether deployed in high-speed packaging lines, automated assembly systems, or precision material handling applications, the **SMC MGGLF40-200-C73** delivers consistent, repeatable performance with minimal maintenance, making it a dependable choice for engineers seeking a balance of compact design, durability, and high-performance pneumatic actuation.

### **Pros and Cons of buying a SMC MGGLF40-200-C73 (MGGLF40200C73) Linear Guide**

#### **Overview**

The **SMC MGGLF40-200-C73** is a **linear guide (ball screw or linear rail system)** designed for precision motion control in industrial automation, robotics, and CNC applications. It is part of SMC s **MGGLF series**, which combines a **ball screw (MGGL)** with a **linear guide (LF)** for smooth, high-precision linear motion.

---

### **Pros**

1. **High Precision and Repeatability**

- The ball screw mechanism ensures minimal backlash and high positional accuracy, making it ideal for applications requiring tight tolerances (e.g., CNC machining, assembly lines).

- The **C73** designation indicates a **super precision grade**, reducing errors in repetitive movements.

2. **Durability and Long Lifespan**

- SMC components are built for **high durability**, with sealed ball screws to prevent contamination from dust, chips, or debris.

- The **stainless steel or hardened steel construction** resists wear, extending operational life even under heavy loads.

3. **Smooth Operation and Low Friction**

- The **recirculating ball nut** reduces friction, allowing for **quiet, efficient motion** with minimal energy loss.

- Suitable for **high-speed applications** where smooth acceleration/deceleration is critical.

4. **Modular and Compatible Design**

- The **MGGLF series** integrates seamlessly with other SMC actuators, motors, and controllers (e.g., **SMC servo motors, amplifiers, and feedback sensors**).

- Supports **custom lengths** (up to 200mm in this model) and can be extended or paired with additional guides for longer travel ranges.

5. **Sealed and Protected Against Contamination**

- The **lip seals and dust covers** prevent ingress of particles, making it suitable for **dirty or unprotected environments** (e.g., metalworking, packaging).

- Resistant to **oil, coolant, and some chemicals**, depending on the lubrication used.

6. **High Load Capacity**

- The **40mm diameter ball screw** provides substantial **axial and radial load support**, making it suitable for **heavy-duty applications** (e.g., press systems, material handling).

- The **LF linear guide** (if part of the assembly) adds stability, reducing deflection under load.

7. **Easy Maintenance**

- **Pre-lubricated** for out-of-the-box operation.

- **Adjustable preload** (if applicable) allows fine-tuning for optimal performance.

- **Modular design** simplifies replacement of worn components (e.g., ball nuts, seals).

8. **Wide Range of Applications**

- Used in **CNC machines, robotics, automated assembly, medical devices, and testing equipment**.

- Compatible with **SMC s servo systems**, enabling **closed-loop control** for precise motion profiling.

9. **Global Support and Availability**

- SMC is a **well-established brand** with **global distribution**, ensuring easy access to spare parts and technical support.

- Extensive **documentation and CAD models** available for integration into custom designs.

10. **Cost-Effective for High-Precision Needs**

- While not the **cheapest** option, it offers **better value than some premium brands** (e.g., THK, NSK) for mid-range precision applications.

- **Lower total cost of ownership** due to longevity and reliability.

---

### **Cons**

1. **Higher Upfront Cost Compared to Basic Guides**

- More expensive than **simple linear rails or slides** (e.g., SMC s LF series alone).

- Requires **additional components** (motor, controller, lubrication) to function fully, increasing system cost.

2. **Limited Travel Range in Standard Model**

- The **200mm maximum travel** may be insufficient for some applications requiring longer strokes.

- For extended travel, **multiple stages or custom assemblies** are needed, adding complexity and cost.

3. **Requires Proper Lubrication and Maintenance**

- While pre-lubricated, **periodic relubrication** is recommended to prevent wear, especially in **high-load or dusty environments**.

- **Improper lubrication** can lead to **seizure or reduced lifespan**.

4. **Sensitivity to Misalignment**

- **Poor mounting or misalignment** can cause **excessive vibration, noise, or premature wear**.

- Requires **precise installation** (e.g., proper base plates, anti-vibration mounts).

5. **Not Ideal for Extremely High Speeds Without Additional Considerations**

- While smooth, **very high-speed applications** may require **dynamic balancing or special lubricants** to prevent overheating.

- **Resonance issues** can occur at certain speeds, requiring tuning.

6. **Dependence on SMC s Ecosystem**

- **Best performance** is achieved when paired with **SMC s servo motors and controllers** (e.g., **SMC servo amplifiers, encoders**).

- Using **third-party components** may require additional calibration or compatibility checks.

7. **Limited Customization for Extreme Conditions**

- Not designed for **extreme temperatures** (e.g., cryogenic or high-heat environments) without modifications.

- **Corrosive environments** may require additional sealing or coatings.

8. **Learning Curve for Integration**

- **Complex setup** for beginners, especially when combining with **servo systems, PLCs, or custom control logic**.

- Requires **basic knowledge of motion control** for optimal tuning (e.g., acceleration profiles, feedback tuning).

9. **Potential for Backlash in Non-Precision Configurations**

- While the **C73 grade minimizes backlash**, **lower-grade versions** (if available) could introduce slight errors in non-critical applications.

10. **Availability of Spare Parts May Vary by Region**

- While SMC is widely available, **local distributors may have limited stock** for niche components (e.g., specific seals, ball nuts).

---

### **Conclusion**

The **SMC MGGLF40-200-C73** is a **high-quality, precision linear guide** well-suited for **industrial automation, CNC, and robotics applications** where **smooth, repeatable motion** is critical. Its **durability, modularity, and compatibility with SMC s ecosystem** make it a **reliable choice** for mid-to-high precision needs.

- **Budget-sensitive applications** (higher upfront cost).

- **Very long-stroke requirements** (standard model limited to 200mm).

- **Non-technical users** (requires basic mechanical and control knowledge).

- **Extreme environmental conditions** (may need additional protection).

For **most industrial applications needing precision and longevity**, this guide **excels** and justifies its cost. If **cost is the primary concern**, alternatives like **SMC s LF series (linear rails) or basic ball screws** may suffice for less demanding tasks.

---

### **Final Recommendation**

You need **high precision and repeatability** (e.g., CNC, assembly, robotics).

Your application involves **moderate to heavy loads** with smooth motion requirements.

You are using **SMC s servo or motion control systems** for integration.

You can **maintain proper lubrication and alignment** for optimal performance.

The **200mm travel is sufficient**, or you plan to extend it with additional components.

You need **longer travel ranges** (look for **custom assemblies or multi-stage guides**).

Your budget is **very tight** (evaluate **basic linear rails or lower-precision ball screws**).

You lack **experience with motion control systems** (may require additional training or support).

Your environment is **extremely harsh** (consider **specialized guides with additional sealing**).

**Best for:** **Industrial automation, CNC machines, robotic arms, and precision assembly lines** where **reliability and accuracy** are prioritized over cost savings.

Details:

Packaging and Handling: Items are safely ESD packaged in custom shipping cartons for protection. Call to use a shipping service other than the ones listed. Sells new and surplus product develops channels to purchase such. All products are guaranteed to be working but may show signs of use if purchasing a used product.

SMC MGGLF40-200-C73 / MGGLF40200C73 USED CYLINDER GUIDE, FRONT FLANGE MOUNT, 40MM BORE, 200MM STROKE.

part #: mgglf40200c73 price

• $281.30

specifications hydraulicylind:

• brand: Smc
• mpn: Mgglf40-200-c73
• part type: Hydraulic Pneumatic Cylinder

seller hydraulicylind:

• rating: 99.6%
• # reviews: 1989 16
• city: 1 Millennium Dr, Willingboro, NJ 08046

returns hydraulicylind:

• policy: Returns Accepted
• time: 30 Days
• method: Money back
• paid by: Buyer

offer hydraulicylind:

• availability: In Stock
• quantity: 1
• started: April 11, 2026
• options: Ship-to-home
• sold: 0

shipping hydraulicylind:

• type: Fixed
• cost: $12.90
• transit: 29-34 Days
• class: Standard
• service: Standard

payments hydraulicylind:

• wallet: Paypal
• credit card: Mastercard
• other

general hydraulicylind:

• condition: Used
• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Cylinders

Smc MGGLF40-200-C73 Is Similar To:

• Cba1fn63-175-hl Smc Pneumatic Cylinder Used (28.9% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(April 19th, 2018)
• Cdpx2n15-125b Smc Guided Cylinder Used (28.2% similar) Items are usually shipped USPS or FedEx ground...(January 14th, 2019)
• Cdq2b100-50dm Smc Pneumatic Cylinder Bore Stroke Used (25.8% similar) Using the ask a question link at end of this item or by ING on our username surplus and there. The cost of combined shipping depends on weight, location buyer and size box. Prices for these options may differ from standard ground shipping. Condition: used Smc CDQ2B100-50DM pneumatic cylinder, 100MM ...(June 15th, 2018)
• Cdq2b100d-j7476-xc11 Smc Pneumatic Cylinder Used (27.3% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(March 5th, 2018)
• Cdq2b25-15dz Smc Compact Cylinder Used (30.8% similar) Sensors included. D-M9P Smc sensors make offer I4. These components worked when removed...(February 16th, 2019)
• Cdq2b50-100dm Smc Pneumatic Cylinder Bore Stroke With Magnet Used (26.7% similar) Smc CDQ2B50-100DM pneumatic cylinder, 50MM bore 100MM stroke with magnet. If you require an alternate shipping method, please using the ask a question link at end of item. Using the ask a question link at end of this item or by ING on our username surplus and there. Condition: used name plate wore ...(May 2nd, 2018)
• Cdq2b80-75dm Smc Pneumatic Cylinder Bore Stroke Used (26.1% similar) Prices for these options may differ from standard ground shipping. The cost of combined shipping depends on weight, location buyer and size box. Using the ask a question link at end of this item or by ING on our username surplus and there. If you require an alternate shipping method, please using ...(June 15th, 2018)
• Cdq2d25-40dm-f7pl Smc Pneumatic Cylinder Used (28.2% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(May 20th, 2018)
• Cdq2kwb25-20d Smc Cylinder Used (28.2% similar) Used, but in good working condition. For expedited shipping options. Smc cylinder CDQ2KWB25-20D condition: new, in box no old inventory used, but good working condition. Some exceptions may apply...(October 9th, 2018)
• Cdq2l16-10d Smc Compact Cylinder Used (31.2% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(January 23rd, 2018)
• Cg1gn40-500 Smc Used Cg1ba40-500-bb6 (36.8% similar) Looks new with minor defects. Barely used...(July 19th, 2017)