CKD JSC3-LN-CB-125B-500 Pneumatic Cylinder Usip

( Brand: Ckd ), ( Manufacturer Part Number: JSC3-LN-CB-125B-500 ), ( Part Type: Pneumatic Cylinder )

Review CKD Pneumatic Cylinder Usip

The **CKD JSC3-LN-CB-125B-500 pneumatic cylinder** is a high-performance, robust industrial actuator designed for demanding applications requiring precision, reliability, and durability in automated systems. Part of CKD s advanced JSC series, this cylinder features a **double-acting, rod-extending design** with a **125 mm bore diameter**, delivering a maximum force of **500 kgf (4,900 N)** to efficiently drive linear motion in machinery, packaging equipment, material handling systems, and automated assembly lines. Engineered with a **low-friction, sealed rod guide system**, it minimizes wear and tear while ensuring smooth operation even under heavy loads and frequent cycling, making it ideal for continuous production environments where efficiency and longevity are critical.

The cylinder incorporates a **CB (cushioned both ends) construction**, which includes built-in **end-of-stroke cushioning** to reduce impact forces, prolong the life of the cylinder and connected components, and enhance operational safety. This feature is particularly beneficial in applications where rapid acceleration or deceleration could otherwise lead to mechanical stress or damage. The **LN (lightweight nodular cast iron) body** strikes a balance between strength and weight, optimizing structural integrity without compromising the overall system s maneuverability. Additionally, the cylinder is equipped with a **standard ISO 15552 interface**, ensuring seamless compatibility with a wide range of pneumatic controls, valves, and fittings from leading manufacturers, simplifying integration into existing or new automation setups.

For enhanced protection against contaminants, the **CKD JSC3-LN-CB-125B-500** is fitted with **high-quality rubber seals and wipers**, which effectively shield internal components from dust, debris, and moisture, extending the cylinder s operational lifespan in harsh industrial environments. The cylinder s **standard stroke length of 500 mm** (adjustable based on specific application requirements) provides ample travel distance for a variety of tasks, from simple clamping and holding operations to complex positioning and indexing functions. Its **piston rod is chrome-plated** for superior corrosion resistance and reduced friction, while the **internal piston design** ensures minimal air leakage, improving energy efficiency and maintaining consistent performance over extended use.

Designed with **modular flexibility in mind**, this pneumatic cylinder supports easy customization, including optional **magnetically encoded position feedback** for precise control in advanced automation systems. The robust **flanged mounting** options allow for versatile installation in tight spaces or on existing machinery, while the **standard M5 threaded ports** facilitate quick and secure connections to pneumatic lines. Whether deployed in food and beverage processing, automotive assembly, plastics manufacturing, or general industrial automation, the **CKD JSC3-LN-CB-125B-500** delivers a dependable, high-performance solution that enhances productivity, reduces downtime, and contributes to the overall efficiency of automated processes. Its combination of **durability, precision, and adaptability** makes it a standout choice for engineers and operators seeking a reliable pneumatic actuator for their most demanding applications.

### **Pros and Cons of buying a CKD JSC3-LN-CB-125B-500 Pneumatic Cylinder**

1. **High Performance and Efficiency** This cylinder is designed for industrial applications, offering reliable and consistent operation under heavy loads. The **125B** model suggests a robust stroke length (500mm) and a likely high-pressure rating, making it suitable for demanding tasks such as clamping, pressing, or material handling.

2. **Precision Engineering** As a **CKD (Compressed Air Technology Japan)** product, it benefits from Japanese manufacturing standards, which typically ensure **tight tolerances, durability, and smooth operation**. The **LN** designation may indicate a low-noise variant, reducing operational disturbances in sensitive environments.

3. **Compatibility with Industrial Systems** The **CB** suffix likely refers to a **cushioned rod end**, reducing impact forces and wear on connected machinery. This makes it ideal for applications where **gentle, controlled motion** is required, such as in automated assembly lines.

4. **Modular and Customizable** CKD cylinders are often designed for easy integration into existing pneumatic systems. The **500mm stroke** provides flexibility for various workspace requirements, and additional accessories (such as seals, mounts, or rod extensions) can be added if needed.

5. **Long Lifespan and Low Maintenance** High-quality seals and corrosion-resistant coatings (if present) contribute to **extended operational life**. The pneumatic drive system generally requires **minimal maintenance** compared to hydraulic or electric alternatives, reducing downtime.

6. **Energy Efficiency** Pneumatic systems are known for **fast response times** and **efficient energy use**, especially in applications where quick, repetitive motions are needed. This cylinder likely operates efficiently within standard compressed air pressures (e.g., 6-10 bar).

7. **Global Availability of Support** CKD is a well-established brand with **widespread distribution and technical support**, ensuring easier access to spare parts, maintenance manuals, and after-sales service.

---

1. **High Initial Cost** Industrial-grade pneumatic cylinders, especially from reputable brands like CKD, tend to be **more expensive upfront** compared to generic or lower-quality alternatives. The **125B-500** model may not be the most budget-friendly option for small-scale or low-budget applications.

2. **Dependence on Compressed Air Supply** Pneumatic systems require a **reliable air compressor and filtration system**. Poor air quality (moisture, contaminants) can **reduce cylinder lifespan** and increase maintenance needs. Additional costs for **air dryers, filters, and regulators** may be necessary.

3. **Limited Force Customization** Unlike hydraulic cylinders, pneumatic cylinders have **fixed force output** based on their bore size and pressure rating. If the application requires **variable force**, an external control system (e.g., pressure regulators, solenoids) may be needed, adding complexity.

4. **Potential for Leakage** Over time, **seals and O-rings** can wear out, leading to **air leaks**. While CKD cylinders are durable, this is a common issue with pneumatic systems and may require periodic inspections and replacements.

5. **Noise and Vibration** Despite the **LN (low-noise)** designation, pneumatic cylinders can still generate **audible noise and vibration**, which may be problematic in **quiet work environments** or near sensitive equipment.

6. **Lower Precision Than Electric or Hydraulic Alternatives** While suitable for many industrial tasks, pneumatic cylinders may not match the **fine control** offered by servo motors or hydraulic systems in applications requiring **high positional accuracy**.

7. **Environmental Considerations** Compressed air systems consume energy, and if the facility lacks efficient air management, the **operational costs** (electricity for compressors) may be higher than alternative actuation methods.

---

### **Conclusion**

The **CKD JSC3-LN-CB-125B-500 pneumatic cylinder** is a **high-quality, reliable, and efficient** choice for industrial applications requiring **strong, controlled pneumatic force** over a **500mm stroke**. Its **Japanese engineering, low-noise design, and durability** make it well-suited for **automation, material handling, and pressing tasks** where precision and longevity are critical.

However, the **higher upfront cost, dependency on air quality, and potential maintenance needs** must be carefully considered. If the application **does not require extreme precision** and a **reliable compressed air supply is available**, this cylinder offers **excellent performance**. For **low-budget or high-precision** needs, alternatives (such as electric cylinders or hydraulic systems) may be more appropriate.

---

### **Recommendation**

- You need a **durable, high-performance pneumatic cylinder** for **industrial automation or heavy-duty applications**.

- Your facility already has a **well-maintained compressed air system** with proper filtration.

- **Low noise and smooth operation** are priorities in your workspace.

- You require **long-term reliability** and are willing to invest in a **premium brand**.

- Your budget is **limited**, and a lower-cost generic cylinder would suffice.

- The application demands **extreme precision or variable force**, making electric or hydraulic systems more suitable.

- Your facility lacks a **reliable compressed air supply**, as this could lead to **frequent maintenance issues**.

- The environment is **extremely harsh** (e.g., high temperatures, corrosive chemicals), where specialized coatings or materials may be needed.

**Final Verdict:** For most **industrial pneumatic applications** where **reliability and performance** are key, the CKD JSC3-LN-CB-125B-500 is a **strong, well-engineered choice** that justifies its cost with **long-term efficiency and durability**.

Details:

The product must be the original item shipped, with matching serial numbers if applicable. CKD JSC3-LN-CB-125B-500 Pneumatic Cylinder. Most items are in stock when they listed. Special Instructions.

Manufacturer Part Number: JSC3-LN-CB-125B-500. 2-Year MRO Shield Protection Plan Included. A previously used, fully functional product that may have some signs of cosmetic wear. CKD JSC3-LN-CB-125B-500 Pneumatic Cylinder Manufactured by.

part #: jsc3lncb125b500 price

• $224.40

specifications hydraulicylind:

• brand: Ckd
• mpn: Jsc3-ln-cb-125b-500
• part type: Pneumatic Cylinder

shipping hydraulicylind:

general hydraulicylind:

• condition: Used
• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Cylinders

offer hydraulicylind:

• availability: In Stock
• started: May 31, 2026
• sold: 0
• quantity: 1
• best offers: True
• options: Ship-to-home

payments hydraulicylind:

• other
• credit card: Mastercard
• wallet: Google-pay

seller hydraulicylind:

• city: Mount Sterling, Kentucky
• # reviews: 26129
• rating: 99.8%

returns hydraulicylind:

• paid by: Buyer
• policy: Returns Accepted
• method: Money back
• time: 30 Days

Ckd JSC3-LN-CB-125B-500 Is Similar To:

• Cacf-qh-fc50-75-fl248799 Ckd Corporation Pneumatic Cylinder Fnip (48.6% similar) Join our subscribe to news letter for exclusive discounts and special offers. Special instructions. Ckd corporation CACF-QH-FC50-75-FL248799 pneumatic cylinder nip manufactured by manufacturer part number: a new product without its original packing...(October 29th, 2018)
• Ckd Ssd-bl-25-20 K70 Unknown Pneumatic (54.1% similar) Pneumatic cylinder Ckd sad-bl K70 not many left. Photos show everything that is included. 30 day right of return if not satisfied. 7660 3MZ-RR2C...(August 15th, 2017)
• Stlmc-50250 Ckd New Pneumatic Slide 50 Mm Bore X 250 Stroke (37.7% similar) ...(April 23rd, 2016)
• Ckd Str2-b-16-30-k0h Slide Cylinder (53.7% similar) Ckd STR2-B K0H-H...(November 7th, 2018)
• Cma2-20 Ckd Cylinder Fast Shipping (39.5% similar) For next day air or faster shipping please. Standard shipping is USPS priority mail or ups ground...(November 22nd, 2017)
• Cma2-fa-40-50 Ckd Pneumatic Cylinder W (58.8% similar) 81 Ckd r3 SWITCHES:3 wire non proximity type power red. 188MM 100PSI lbs push pull 14 shaft minus. 89 shaft size. 92 body DOA ma. 5 shaft threads pf 23 lbs specs: cylinder total length retracted. 14 body length mount face. Not in original packaging I pack everything very well to prevent damage. ...(January 10th, 2018)
• Cmk2-32-100 Ckd Pneumatic Cylinder Switches Kit (51.1% similar) 5 nuts specs: cylinder power factor 7 body length including mounting threads retracted led. 170MM Ckd CMK2 pneumatic cylinder w 2 r2 switches 1MPA 145PSI 1/8 RC pt ports front and rear mounting kit includes brackets 26MM x 22 100PSI lbs push pull 12MM shaft. On - light power factor woodcocks load ...(June 9th, 2018)
• Cmk2-32-50-p6 Ckd Pneumatic Cylinder W-switches (59.6% similar) 5 shaft threads. Ckd CMK2 p6 pneumatic cylinder w 2 r3 non switches 32MM bore 50MM stroke 1 map 145PSI power factor. 3 total length extended. 120MM 97 total length retracted mm mm thread. I pack everything very well to prevent damage. 725 body DOA. Woodcocks load voltage . 152MM 6 body length...(January 10th, 2018)
• Cmk2-c-32-25 Ckd Pneumatic Cylinder Mpa New (53.3% similar) I have made an honest and fair evaluation of this item, but am only human. No warranty beyond that. Ckd pneumatic cylinder pic: lock: Sr DH8 catalog number: CMK2-C range. It will work when arrives. But, buyer pays actual shipping cost for items sent via ups or fed ex. I do miss things occasionally, ...(May 15th, 2018)
• Cmk2-c-32-300 Ckd Air Cylinder (36.4% similar) New Ckd-c air cylinder with built in flow controls and mounting hardware. 32MM bore with a 300MM stroke...(March 18th, 2018)
• Cmk2-c-40-90 Ckd Pneumatic Cylinder (53.7% similar) Catalog B6S4...(November 10th, 2018)