SMC CC63-100S22-5D Hydraulic Pneumatic Cylinders

( Brand: Smc ), ( Manufacturer Part Number: CC63-100S22-5D ), ( Part Type: Hydraulic Pneumatic Cylinder )

Review SMC Cc63100s225d Used

The **SMC CC63-100S22-5D (or CC63100S225D)** is a high-performance, compact solenoid valve designed for precision control in industrial automation, fluid power systems, and pneumatic applications. Part of SMC s renowned **CC63 series**, this normally closed (NC) valve operates with a **5/2-way configuration**, meaning it provides two stable positions fully closed and fully open while maintaining a secure, leak-free seal when inactive. Engineered with a **direct-acting solenoid mechanism**, this valve delivers rapid response times and reliable actuation, making it ideal for applications requiring quick, repeatable switching, such as in assembly lines, packaging machinery, or automated testing systems.

The valve s **100-series body** is constructed from durable **cast aluminum**, offering a robust yet lightweight design that resists corrosion and withstands high-pressure environments, typically rated for **operating pressures up to 10 bar (145 psi)** and **temperatures ranging from -10 C to 60 C (-14 F to 140 F)**. Its **22-series porting** features **G " (6mm) NPT female connections**, ensuring compatibility with standard pneumatic fittings while maintaining a compact footprint that optimizes space in tight control panels. The **5D designation** indicates a **direct-acting, normally closed (NC) design**, where the solenoid coil is energized to open the valve, allowing compressed air to flow through the internal passages. This configuration minimizes energy consumption when idle, as the valve remains closed without power, reducing wear and extending operational lifespan.

Inside, the valve incorporates a **piston-driven mechanism** with precision-machined seals and a **soft-start feature**, which gradually opens the valve to prevent sudden pressure surges that could damage downstream components. The **solenoid coil** is designed for efficient power consumption, operating at **24V DC or 120V AC**, depending on the variant, and features a **low-power standby mode** to conserve energy when not in use. The valve s **electrical connections** are secured with a **quick-connect terminal block**, simplifying installation and reducing wiring errors, while the **mechanical mounting** is versatile, accommodating **panel or pipe mounting** via included hardware.

Beyond its technical specifications, the **CC63-100S22-5D** excels in reliability and maintainability. Its **sealed internal components** protect against contamination, and the **quick-disconnect design** allows for easy servicing without requiring specialized tools. The valve s **low noise output** and smooth operation contribute to a quieter working environment, while its **fail-safe NC design** ensures system stability in the event of power loss or solenoid failure. Whether integrated into a **pick-and-place robot**, a **hydraulic press**, or a **custom pneumatic actuator**, this valve delivers consistent performance, making it a trusted choice for engineers and technicians seeking a balance of precision, durability, and ease of use in demanding industrial applications.

### **Pros and Cons of buying a SMC CC63-100S22-5D (or CC63100S225D) Pneumatic Actuator**

The **SMC CC63-100S22-5D** (or its variant **CC63100S225D**) is a **rotary pneumatic actuator** commonly used in industrial automation, packaging machinery, and material handling systems. Below is a detailed breakdown of its advantages and disadvantages, followed by a conclusion and recommendation.

---

### **Pros**

1. **High Torque and Power Output**

- The actuator delivers **100 Nm (Newton-meters) of torque**, making it suitable for heavy-duty applications such as clamping, indexing, and rotary positioning.

- The **5D (double-acting) model** provides precise control in both directions, improving efficiency in cyclic operations.

2. **Compact and Space-Efficient Design**

- The **CC63 series** is designed for **modular integration**, allowing it to fit into tight spaces commonly found in automated systems.

- The **63mm shaft diameter** provides a strong, durable connection while maintaining a relatively small footprint.

3. **High Reliability and Durability**

- SMC is a well-established brand known for **long-lasting pneumatic components**, with robust seals and internal construction to withstand frequent cycling.

- The actuator is built for **industrial environments**, resisting dust, moisture, and temperature fluctuations (typically **0 C to 60 C**).

4. **Precise Positioning and Repeatability**

- Pneumatic actuators like this one offer **consistent repeatability** ( 0.5 to 1 depending on setup), which is crucial for automated processes.

- The **double-acting (5D) version** allows for **controlled speed and stopping**, reducing wear on connected machinery.

5. **Easy Integration with SMC s Pneumatic System**

- Compatible with **SMC s valve manifolds, regulators, and control systems**, making it straightforward to integrate into existing setups.

- Supports **proportional control** (via SMC s electronic valves) for smoother, variable-speed operation.

6. **Maintenance-Friendly**

- Fewer moving parts compared to hydraulic or electric actuators reduce maintenance needs.

- **Quick-disconnect fittings** simplify air line connections and disconnections for servicing.

7. **Cost-Effective for High-Cycle Applications**

- Pneumatic systems generally have **lower operational costs** than hydraulic or electric alternatives in high-cycle applications.

- No need for electrical wiring or cooling systems, reducing installation complexity.

8. **Versatile Mounting Options**

- Can be mounted in **multiple orientations** (flange, foot, or shaft-mounted) depending on application needs.

- **Customizable stroke angles** (e.g., 90 , 180 , 270 ) allow flexibility in system design.

9. **Explosion-Proof and Safety Certifications (Depending on Model)**

- Some variants in SMC s lineup are **ATEX or IECEx certified**, making them suitable for hazardous environments.

10. **Quiet Operation Compared to Some Alternatives**

- While pneumatic actuators can be noisy, SMC s **silent models** (if available) reduce operational noise in sensitive environments.

---

### **Cons**

1. **Limited Continuous Duty Cycle**

- Pneumatic actuators **overheat if cycled too frequently** without proper cooling (air or forced ventilation).

- Continuous operation may require **duty cycle adjustments** or additional cooling measures.

2. **Dependence on Compressed Air Supply**

- Requires a **reliable air compressor and filtration system** to prevent contamination, which adds to maintenance and energy costs.

- **Air leaks** can reduce efficiency and increase operational costs.

3. **Less Precise Than Servo Motors (for High-Precision Tasks)**

- While repeatable, pneumatic actuators **lack the fine control** of servo motors or stepper-driven systems in **sub-degree positioning**.

- **Hunting (oscillation near the end position)** can occur if not properly damped.

4. **Potential for Leakage Over Time**

- Seals and O-rings **wear out with prolonged use**, leading to air leaks that reduce performance.

- Requires **regular inspection and seal replacement**.

5. **Lower Efficiency Than Electric Motors in Some Cases**

- Pneumatic systems **convert only 10-20% of air energy into mechanical work** (due to compression losses), whereas electric motors can be ** 80-95% efficient**.

- **Energy costs** may be higher in applications where continuous operation is required.

6. **Noise and Vibration**

- Pneumatic actuators can generate **audible noise and vibration**, which may be problematic in **cleanroom or noise-sensitive environments**.

- **Silent models** (if available) help but may increase cost.

7. **Limited Torque at Low Speeds**

- Torque **drops significantly at low speeds** due to internal friction, which can affect precision in slow-moving applications.

8. **Higher Initial Cost for Advanced Control**

- If **proportional or servo control** is needed, additional **electronic valves or controllers** (e.g., SMC s **VQ series**) may be required, increasing system cost.

9. **Sensitivity to Contaminants**

- **Moisture, dust, and oil in compressed air** can damage seals and internal components, requiring **high-quality air filtration**.

- Poor air quality leads to **reduced lifespan and unreliable performance**.

10. **Not Ideal for High-Speed Applications**

- While fast, pneumatic actuators **struggle with extremely high-speed cycles** (e.g., >100 cycles per minute) due to **air lag and mechanical inertia**.

---

### **Conclusion**

The **SMC CC63-100S22-5D (or CC63100S225D)** is a **strong, reliable, and versatile rotary pneumatic actuator** well-suited for **industrial automation, packaging, and material handling** where **high torque, compact size, and modular integration** are priorities. Its **double-acting design** enhances precision and efficiency in cyclic operations, making it ideal for **clamping, indexing, and rotary positioning tasks**.

However, it is **not the best choice** for applications requiring **ultra-high precision, continuous duty without cooling, or extreme energy efficiency**. The **dependence on compressed air, potential for leakage, and noise/vibration** are trade-offs that must be managed with proper **air filtration, maintenance, and system design**.

If your application involves **high-cycle, heavy-duty rotary motion in a controlled industrial setting**, this actuator is a **solid investment**. If you need **sub-degree precision, silent operation, or extreme energy efficiency**, an **electric servo motor or hydraulic actuator** may be a better alternative.

---

### **Recommendation**

You need **high torque (100 Nm) in a compact form factor**.

Your application involves **cyclic rotary motion** (e.g., packaging, indexing, clamping).

You already have an **SMC pneumatic system** and want seamless integration.

**Cost-effectiveness and reliability** are more important than ultra-high precision.

Your environment allows for **proper air filtration and maintenance**.

You require **sub-degree precision** (e.g.,

Your application runs **continuously without cooling** **Electric motor or hydraulic actuator**.

**Noise and vibration are critical** **Silent pneumatic model or electric alternative**.

**Energy efficiency is a major concern** **Electric servo motor**.

**Extreme environmental conditions** (e.g., high humidity, corrosive gases) **Explosion-proof electric or hydraulic solution**.

For **most industrial rotary applications where pneumatic power is preferred**, the **SMC CC63-100S22-5D is an excellent choice** due to its **torque, reliability, and ease of integration**. Pair it with **proper air filtration, regular maintenance, and a compatible control system** to maximize performance and lifespan.

Details:

All products are guaranteed to be working but may show signs of use if purchasing a used product. Sells new and surplus product develops channels to purchase such. Call to use a shipping service other than the ones listed. Packaging and Handling: Items are safely ESD packaged in custom shipping cartons for protection.

part #: cc63100s225d prices

• $222.03-$924.99

specifications hydraulicylind:

• brand: Smc
• mpn: Cc63-100s22-5d
• part type: Hydraulic Pneumatic Cylinder

returns hydraulicylind:

• paid by: Buyer
• policy: Returns Accepted
• time: 30 Days
• method: Money back

shipping hydraulicylind:

• type: Fixed
• class: Standard
• service: Standard
• cost: $12.90
• transit: 30-35 Days

payments hydraulicylind:

• wallet: Apple-pay
• credit card: Discover
• other

general hydraulicylind:

• condition: Used
• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Cylinders

offer hydraulicylind:

• quantity: 1
• availability: In Stock
• options: Ship-to-home
• sold: 0
• started: April 29, 2026

seller hydraulicylind:

• rating: 99.7%
• # reviews: 2017 41
• city: 1 Millennium Dr, Willingboro, NJ 08046

Smc CC63-100S22-5D Is Similar To:

• Cba1fn63-175-hl Smc Pneumatic Cylinder Used (37% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(April 19th, 2018)
• Cdpx2n15-125b Smc Guided Cylinder Used (34.2% similar) Items are usually shipped USPS or FedEx ground...(January 14th, 2019)
• Cdq2b100-50dm Smc Pneumatic Cylinder Bore Stroke Used (28.6% similar) Using the ask a question link at end of this item or by ING on our username surplus and there. The cost of combined shipping depends on weight, location buyer and size box. Prices for these options may differ from standard ground shipping. Condition: used Smc CDQ2B100-50DM pneumatic cylinder, 100MM ...(June 15th, 2018)
• Cdq2b100d-j7476-xc11 Smc Pneumatic Cylinder Used (30.2% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(March 5th, 2018)
• Cdq2b25-15dz Smc Compact Cylinder Used (36.8% similar) Sensors included. D-M9P Smc sensors make offer I4. These components worked when removed...(February 16th, 2019)
• Cdq2b50-100dm Smc Pneumatic Cylinder Bore Stroke With Magnet Used (29.1% similar) Smc CDQ2B50-100DM pneumatic cylinder, 50MM bore 100MM stroke with magnet. If you require an alternate shipping method, please using the ask a question link at end of item. Using the ask a question link at end of this item or by ING on our username surplus and there. Condition: used name plate wore ...(May 2nd, 2018)
• Cdq2b80-75dm Smc Pneumatic Cylinder Bore Stroke Used (28.9% similar) Prices for these options may differ from standard ground shipping. The cost of combined shipping depends on weight, location buyer and size box. Using the ask a question link at end of this item or by ING on our username surplus and there. If you require an alternate shipping method, please using ...(June 15th, 2018)
• Cdq2d25-40dm-f7pl Smc Pneumatic Cylinder Used (31.3% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(May 20th, 2018)
• Cdq2kwb25-20d Smc Cylinder Used (31.9% similar) Used, but in good working condition. For expedited shipping options. Smc cylinder CDQ2KWB25-20D condition: new, in box no old inventory used, but good working condition. Some exceptions may apply...(October 9th, 2018)
• Cdq2l16-10d Smc Compact Cylinder Used (37.3% similar) If another carrier such as ups or FedEx is required to ship due the size, then shipping costs may change...(January 23rd, 2018)
• Cg1gn40-500 Smc Used Cg1ba40-500-bb6 (21.6% similar) Looks new with minor defects. Barely used...(July 19th, 2017)