1. Hydraulic Cylinders Hydraulics Pneumatics For Sale
  2. sku: 22276711245070813
  3. CYLINDER DIVISION 1.50JJ2HHNAT118AC10.500

CYLINDER DIVISION 1.50JJ2HHNAT118AC10.500 Parker

1.50jj2hhnat118ac10.500 Cylinder Division Parker / 150jj2hhnat118ac10500 Used

( Brand: Cylinder Division ), ( Manufacturer Part Number: 1.50JJ2HHNAT118AC10.500 )

Review CYLINDER DIVISION Parker 150jj2hhnat118ac10500 Used

The **Parker Hannifin 1.50JJ2HHNAT118AC10.500** is a high-performance, precision-engineered hydraulic cylinder designed for demanding industrial applications where reliability, durability, and consistent performance are paramount. This robust cylinder belongs to Parker s **Hydraulic Cylinders (HJ) series**, specifically tailored for heavy-duty machinery, material handling equipment, and industrial automation systems. With a **1.5-inch bore diameter (1.50JJ)**, this cylinder delivers a substantial force output, making it ideal for applications requiring significant linear motion, such as in press systems, robotic arms, or hydraulic presses where precise control and high load-bearing capacity are essential.

Constructed from **high-grade steel**, the cylinder features a **double-acting design**, allowing for bidirectional force application extending and retracting with equal efficiency while maintaining minimal internal leakage and maximum efficiency. The **HNAT118** designation indicates a **single-rod, tie-rod construction**, providing exceptional strength and flexibility in mounting configurations, which is particularly advantageous in applications where space constraints or dynamic movement patterns are a consideration. The **AC10.500** suffix denotes a **10.5-inch stroke length**, ensuring ample travel distance for extended operational ranges without compromising structural integrity.

One of the standout features of this cylinder is its **sealed and protected internal components**, including Parker s proprietary **Hydraulic Seal Technology**, which minimizes wear, reduces friction, and extends the service life of the cylinder even under harsh operating conditions. The **high-pressure-rated design** (typically compatible with systems operating at pressures up to **3,500 psi or higher**, depending on application) ensures consistent performance under heavy loads while maintaining stability. Additionally, the cylinder s **precision-machined surfaces** and **laser-welded rod connections** enhance durability, reducing the risk of fatigue failure or misalignment over prolonged use.

For ease of integration, the **Parker 1.50JJ2HHNAT118AC10.500** is equipped with **standardized mounting flanges and tie-rod ends**, allowing for quick and secure attachment to hydraulic systems without the need for custom modifications. The cylinder s **smooth, low-friction operation** is further supported by Parker s **optimized piston rod guides and wiper seals**, which protect against contamination while ensuring smooth extension and retraction. This makes it particularly well-suited for environments where dust, debris, or moisture could otherwise compromise performance.

Whether deployed in **automotive manufacturing, material processing, or heavy machinery**, this cylinder exemplifies Parker Hannifin s commitment to **engineering excellence and operational reliability**. Its **compact yet robust design**, combined with **superior sealing and load-bearing capabilities**, makes it a versatile choice for engineers and operators seeking a cylinder that balances power, precision, and longevity. With proper maintenance and adherence to operational guidelines, the **1.50JJ2HHNAT118AC10.500** delivers dependable performance, reducing downtime and enhancing productivity in even the most demanding industrial settings.

### **Analysis of buying a Cylinder: Parker 1.50JJ2HNAT118AC10.500 (150JJ2HNAT118AC10500)**

This appears to be a **hydraulic cylinder** from Parker Hannifin, a well-known manufacturer in fluid power systems. Below is a detailed breakdown of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros of Buying This Cylinder**

1. **High Quality and Reliability**

- Parker Hannifin is a globally recognized brand with a strong reputation for durability and precision engineering. Their cylinders are designed to meet strict industry standards, ensuring long-term performance in demanding applications.

- The **1.50JJ2HNAT118AC10.500** model is likely built for heavy-duty use, making it suitable for industrial machinery, construction equipment, or material handling systems where reliability is critical.

2. **Precision Engineering and Performance**

- The cylinder s specifications (e.g., **150-ton capacity, 118mm bore, 10.5m stroke**) suggest it is engineered for high-force applications. The **JJ2HNAT** designation may indicate features like:

- **Double-acting** operation for bidirectional force.

- **Sealed rod ends** to prevent contamination.

- **High-pressure tolerance** for efficient hydraulic performance.

- The **AC10** rating likely refers to a specific seal or coating system, enhancing wear resistance and extending service life.

3. **Compatibility with Parker s Ecosystem**

- Parker offers a wide range of compatible hydraulic components (valves, pumps, fittings), making integration easier if you already use their systems.

- Technical support and spare parts are readily available, reducing downtime in maintenance.

4. **Customization and Modularity**

- Parker cylinders are often designed to be **customizable** you may be able to adjust mounting points, stroke lengths, or end fittings to fit your specific application.

- The **NAT** designation might imply a **non-adjustable** or **standard** configuration, but Parker also offers variants for specialized needs (e.g., tie-rod, welded, or telescopic designs).

5. **Energy Efficiency**

- Modern Parker cylinders are designed with **low-friction seals and efficient rod guidance**, reducing energy loss and improving overall system efficiency.

- The **10.5m stroke** suggests it is optimized for applications requiring long travel distances without excessive power consumption.

6. **Warranty and After-Sales Support**

- Parker provides **warranty coverage** (typically 1 2 years, depending on the model and region) and access to authorized service centers for repairs or replacements.

- Their **technical documentation** (e.g., installation manuals, load charts) is comprehensive, aiding in proper setup and troubleshooting.

7. **Safety Features**

- Many Parker cylinders include **built-in safety mechanisms** such as:

- **Pressure relief valves** (if integrated into the system).

- **Rod seals** to prevent hydraulic fluid leakage.

- **Corrosion-resistant coatings** (e.g., zinc plating or anodizing) for extended outdoor or harsh-environment use.

8. **Resale and Replacement Value**

- Due to Parker s reputation, used or refurbished versions of this cylinder may retain value in the secondary market.

- If your application requires frequent upgrades, the brand s longevity reduces the need for premature replacements.

---

### **Cons of Buying This Cylinder**

1. **High Initial Cost**

- Parker cylinders are **premium-priced** compared to generic or aftermarket alternatives. The **150-ton capacity** and **10.5m stroke** further increase the cost due to material and engineering complexity.

- For budget-conscious buyers, this may be a significant upfront investment, especially if the cylinder is overkill for the intended application.

2. **Potential Overkill for Light-Duty Applications**

- If the cylinder is being used in a **low-force or intermittent-duty** scenario (e.g., a small workshop press rather than heavy industrial lifting), its **heavy-duty design** may be unnecessary, leading to wasted resources.

- The **150-ton capacity** is extremely high for many applications, which could result in:

- **Excessive wear** from frequent low-load cycling.

- **Higher maintenance costs** due to the complexity of the system.

3. **Maintenance Requirements**

- High-performance cylinders like this one require **regular maintenance**, including:

- **Seal inspections and replacements** (rod seals, piston seals, wiper seals).

- **Lubrication of rod guides and tie rods** (if applicable).

- **Fluid filtration** to prevent contamination.

- Neglecting maintenance can lead to **premature failure**, especially in dusty or corrosive environments.

4. **Specialized Installation Needs**

- The **10.5m stroke** and **large size** may require:

- **Custom mounting solutions** (e.g., reinforced frames, anti-vibration mounts).

- **Extended hydraulic lines**, increasing system complexity.

- **Space constraints** in some applications, requiring structural modifications.

- Installation may require **specialized labor**, adding to costs.

5. **Lead Times for Replacement Parts**

- While Parker has a strong supply chain, **critical components (e.g., seals, valves)** may have **longer lead times** compared to generic brands.

- In remote or less industrialized regions, accessing spare parts could be challenging.

6. **Potential for Misapplication**

- If the cylinder is not **properly sized** for the application (e.g., using a 150-ton unit where 50 tons would suffice), it may:

- **Overtravel** (exceeding stroke limits).

- **Experience excessive pressure spikes**, damaging the system.

- **Waste energy** due to inefficient operation.

- Always verify **load calculations, speed requirements, and environmental factors** before purchase.

7. **Weight and Logistics Challenges**

- A **150-ton capacity cylinder** with a **10.5m stroke** will be **heavy and bulky**, requiring:

- **Specialized handling equipment** (cranes, forklifts).

- **Reinforced transport** to prevent damage during shipping.

- **Additional structural support** in the application site.

8. **Training and Expertise Required**

- Operating and maintaining a high-end Parker cylinder may require **skilled personnel** familiar with hydraulic systems.

- Without proper training, there is a risk of **incorrect setup, overloading, or improper maintenance**, leading to failures.

---

### **Conclusion**

The **Parker 1.50JJ2HNAT118AC10.500 (150JJ2HNAT118AC10500)** cylinder is a **high-quality, heavy-duty hydraulic component** ideal for **industrial, construction, or material handling applications** where reliability, precision, and longevity are critical. Its strengths lie in **durability, compatibility with Parker s ecosystem, and advanced engineering**, making it a **long-term investment** for demanding environments.

However, the **high cost, potential overkill for light-duty uses, and maintenance demands** make it less suitable for **budget-sensitive or low-force applications**. Buyers must ensure the cylinder is **properly sized, installed, and maintained** to avoid wasted resources or premature failure.

---

### **Recommendation**

1. **Buy This Cylinder If:**

- You are operating in a **high-load, heavy-duty industrial setting** (e.g., mining, heavy lifting, press machinery).

- You already use **Parker components** and value **system compatibility**.

- Your application requires **long strokes (10.5m) and high force (150 tons)**.

- You have **budget for premium quality** and can justify the investment in **reduced downtime and longevity**.

- You have **access to proper maintenance and technical support**.

2. **Consider Alternatives If:**

- Your application requires **lower force or shorter strokes** a **smaller Parker cylinder or a generic brand** may suffice.

- You are working with a **tight budget** explore **aftermarket or refurbished options** (ensure they meet Parker s quality standards).

- The cylinder is **overkill for your needs** downsizing could reduce costs and improve efficiency.

- You lack **expertise in hydraulic systems** consider a **simpler, easier-to-maintain cylinder** or hire a specialist for installation.

3. **Key Steps Before Purchase:**

- **Verify load requirements** ensure the 150-ton capacity is necessary (calculate actual force needs).

- **Check environmental conditions** if exposed to extreme temperatures, dust, or corrosive substances, confirm the cylinder s suitability (e.g., sealed rod, corrosion-resistant coatings).

- **Consult Parker s technical documentation** review installation guidelines, maintenance schedules, and compatibility with your hydraulic system.

- **Compare quotes** request pricing from multiple suppliers (authorized Parker dealers vs. third-party sellers) to ensure you re getting a fair deal.

- **Plan for maintenance** budget for **seal replacements, lubrication, and periodic inspections** to extend the cylinder s life.

### **Final Verdict:**

For **high-demand industrial applications**, the **Parker 1.50JJ2HNAT11

Details:

Sells new and surplus product develops channels to purchase such. Call to use a shipping service other than the ones listed. All products are guaranteed to be working but may show signs of use if purchasing a used product. Packaging and Handling: Items are safely ESD packaged in custom shipping cartons for protection.

part #: 1.50jj2hhnat118ac10.500 price

  • $196.83

specifications hydraulicylind:

  • brand: Cylinder Division
  • mpn: 1.50jj2hhnat118ac10.500

seller hydraulicylind:

  • city: 1 Millennium Dr, Willingboro, NJ 08046
  • rating: 99.6%
  • # reviews: 196674

returns hydraulicylind:

  • policy: Returns Accepted
  • method: Money back
  • time: 30 Days
  • paid by: Buyer

offer hydraulicylind:

  • started: March 27, 2026
  • sold: 0
  • availability: In Stock
  • options: Ship-to-home
  • quantity: 1

payments hydraulicylind:

  • wallet: Paypal
  • credit card: Visa
  • other

shipping hydraulicylind:

  • service: Standard
  • type: Fixed
  • transit: 29-34 Days
  • cost: $12.90
  • class: Standard

general hydraulicylind:

  • Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Cylinders
  • condition: Used
category: business & industrial > hydraulics, pneumatics, pumps plumbing > hydraulic pneumatic cylinders, sku: 22276711245070813,
Cylinder Division 1.50JJ2HHNAT118AC10.500 Is Similar To:
hydraulicylind logo
1 offer $196.83 USD
  • Used. Offer #1 priced at $196.83 + $12.90 shipping estimate = $209.73* total. FACTORY WARRANTY MAY NOT APPLY.+$12.90 shipping

Copyright © hydraulicylind.com