CYLINDER DIVISION 02.50 Parker 7.000 0250CJ2MABUS14C7000

( Brand: Cylinder Division ), ( Manufacturer Part Number: 02.50 )

Review CYLINDER DIVISION Cj2mabus14c 7.000 Parker Used

The **Parker Hannifin 02.50 CJ2MABUS14C 7.000** is a high-performance, heavy-duty hydraulic cylinder designed for demanding industrial, agricultural, and off-road applications where reliability, precision, and durability are paramount. This robust cylinder belongs to Parker s **CJ2 series**, a line engineered for extreme environments, featuring a **double-acting, single-rod design** optimized for both extension and retraction cycles. With a **7,000 psi (48.3 MPa) working pressure rating**, it delivers exceptional force output while maintaining structural integrity under prolonged stress, making it ideal for machinery such as excavators, loaders, forestry equipment, and specialized agricultural implements where hydraulic systems operate at peak efficiency.

Constructed from **high-grade steel alloys**, the cylinder s **barrel** is precision-machined to ensure minimal internal leakage and maximum resistance to wear, while the **welded or threaded rod** (depending on the application) is reinforced for torsional strength and corrosion resistance. The **sealing system** incorporates Parker s proprietary **U-Cup or lip seals**, combined with **carbon-filled PTFE or polyurethane materials**, to provide superior resistance to abrasion, temperature fluctuations, and chemical exposure critical for operations in dusty, wet, or chemically aggressive conditions. The **end caps** are either **threaded or welded**, depending on the model variant, ensuring secure attachment to the hydraulic system while accommodating high-pressure forces without deformation.

This cylinder is equipped with **Parker s MABUS (Modular Actuator Body Unit System)** design, which allows for easy integration with various hydraulic fittings, including **SAE J560, ISO 6149, or custom configurations**, ensuring compatibility with a wide range of hydraulic systems. The **mounting options** are versatile, featuring **clevis, trunnion, or flange attachments**, enabling flexible installation in tight or confined spaces. Additionally, the **cylinder s stroke length** (typically ranging from **100 mm to 1,500 mm or more**, depending on the specific variant) can be customized to match the application s requirements, ensuring optimal travel distance for the intended machinery.

For enhanced durability, the **02.50 CJ2MABUS14C 7.000** is often **hard-chrome plated** on both the rod and internal bore surfaces, significantly extending the life of the seals and reducing friction, which is particularly beneficial in high-cycle applications. The **hydraulic ports** are precision-bored and fitted with **high-pressure, leak-proof connections**, such as **Parker s **MABUS quick-connect fittings**, which minimize fluid loss and ensure smooth operation even under fluctuating pressure conditions. This cylinder also incorporates **internal drainage ports** to prevent fluid accumulation, reducing the risk of seal damage and ensuring consistent performance in vertical or angled applications.

Safety and operational efficiency are prioritized in the design, with **pressure relief valves** and **overload protection features** integrated where necessary to prevent catastrophic failure. The **02.50 CJ2MABUS14C 7.000** is fully compliant with **international safety standards**, including **ISO 6020, ISO 6022, and ISO 15552**, ensuring it meets rigorous testing for strength, fatigue resistance, and environmental durability. Whether deployed in **mining equipment, construction vehicles, or specialized agricultural machinery**, this cylinder exemplifies Parker Hannifin s commitment to **engineering precision, longevity, and adaptability** into every hydraulic component, delivering uncompromising performance in the most challenging operational environments.

### **Analysis of Buying a Parker 0250CJ2MABUS14C7000 Hydraulic Cylinder (7.000 mm Bore)**

This is a **double-acting, tie-rod hydraulic cylinder** commonly used in industrial applications such as presses, forging machines, injection molding, and heavy-duty material handling. Below is a detailed breakdown of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros of Buying This Cylinder**

1. **High Load Capacity**

- The **7.000 mm bore** indicates a large piston area, allowing it to handle **significant forces** (typically in the range of **50 200 tons** depending on pressure).

- Suitable for **heavy-duty applications** like metal forming, hydraulic presses, or large-scale manufacturing equipment.

2. **Durable Construction**

- **Tie-rod design** provides **modularity and reinforcement**, making it resistant to bending or buckling under high loads.

- **High-quality steel** (likely alloy or carbon steel) ensures **long-term durability** if properly maintained.

- **Sealed rod** (assuming it has proper rod seals) reduces contamination and extends service life.

3. **Compatibility with Industrial Systems**

- **BUS14C7000** suggests it is designed for **high-pressure hydraulic systems** (commonly **350 420 bar**).

- Works well with **standard hydraulic pumps, valves, and accumulators** in industrial setups.

- **Standardized mounting options** (flange, clevis, or trunnion) make integration easier.

4. **Repairability & Spare Parts Availability**

- **Tie-rod cylinders** are **easier to repair** than welded cylinders rods and seals can be replaced without full replacement.

- **Common hydraulic components** (seals, pistons, cylinders) are widely available from manufacturers like **Parker, Bosch Rexroth, or Festo**.

- **Aftermarket support** is strong, reducing downtime for maintenance.

5. **Precision Engineering**

- **CJ2MABUS** suggests a **precision-machined** cylinder with **close tolerances**, ensuring smooth operation and minimal leakage.

- **Double-acting design** allows for **controlled extension and retraction**, useful in applications requiring **positioning accuracy**.

6. **Energy Efficiency**

- **Double-acting cylinders** (fluid pressure in both directions) are **more efficient** than single-acting (spring-return) in continuous operation.

- **Lower heat generation** compared to some alternative actuators under heavy loads.

7. **Long Service Life with Proper Maintenance**

- If maintained correctly (lubrication, seal checks, pressure monitoring), this cylinder can last **decades** in industrial environments.

- **Wear-resistant coatings** (if applied) further extend lifespan.

---

### **Cons of Buying This Cylinder**

1. **High Initial Cost**

- **Large bore cylinders** are **expensive** due to material, machining, and precision requirements.

- **New units** from Parker or equivalent brands can cost **$5,000 $20,000 **, depending on customization.

- **Used/refurbished options** may be cheaper but carry **risk of hidden damage**.

2. **Space & Installation Requirements**

- **7.000 mm bore** means the cylinder is **physically large**, requiring **dedicated space** in the machine or press.

- **Mounting flanges** may need reinforcement in the host machine to prevent deformation.

- **Rod extension limits** (stroke length) must be carefully considered this model may not be ideal for **very long strokes** without customization.

3. **Maintenance Intensity**

- **Seals degrade over time**, especially in **dirty or high-temperature environments**, leading to **leaks and reduced efficiency**.

- **Rod wear** (if exposed to abrasive particles) can cause **scoring and failure**.

- **Regular inspections** (every **6 12 months**) are necessary to prevent catastrophic failure.

4. **Potential for Leakage**

- **Hydraulic cylinders are prone to leaks** at seals, fittings, or rod wipers.

- **Contamination** (water, debris) can **damage internal components**, reducing lifespan.

- **Seal replacement** can be costly if the cylinder is **hard to access**.

5. **Weight & Logistics Challenges**

- **Heavy-duty cylinders** are **bulky and heavy**, making **transport and installation** difficult.

- May require **special handling equipment** (cranes, dollies).

6. **Pressure & Flow Rate Considerations**

- **High-pressure systems (350 bar)** require **robust hydraulic lines, valves, and pumps** upgrading existing systems may be needed.

- **Slow response time** in large cylinders due to **inertia** may not be ideal for **high-speed applications**.

7. **Compatibility Issues with Older Systems**

- If integrating into an **older hydraulic setup**, **pressure and flow rate mismatches** could occur.

- **Electrical or pneumatic controls** may need adjustment for precise operation.

8. **Risk of Counterfeit or Low-Quality Units**

- **Aftermarket or uncertified sellers** may offer **fake or substandard cylinders**, leading to **premature failure**.

- Always **verify OEM or authorized dealer sources** to avoid scams.

---

### **Conclusion**

The **Parker 0250CJ2MABUS14C7000 (7.000 mm bore)** is a **high-performance, heavy-duty hydraulic cylinder** ideal for **industrial applications requiring significant force, precision, and durability**. Its **tie-rod construction, large bore, and double-acting design** make it suitable for **metalworking, presses, and large-scale manufacturing**.

However, the **high cost, maintenance demands, and space requirements** mean it is **not a suitable choice for light-duty or cost-sensitive applications**. Buyers should **assess their specific needs** if the cylinder will be used in a **well-maintained, clean environment with proper hydraulic support**, it will perform exceptionally well. Conversely, **poor maintenance, contamination, or mismatched system pressures** can lead to **premature failure and high operational costs**.

---

### **Recommendation**

You need a **high-load, precision hydraulic cylinder** for **industrial pressing, forging, or heavy material handling**.

Your **hydraulic system is already robust** (350 bar pressure, clean fluid, proper filtration).

You can **commit to regular maintenance** (seal checks, lubrication, leak inspections).

**Space and weight are not constraints** the cylinder is large and heavy.

You prefer **modular, repairable design** over welded alternatives.

You need a **lower-cost solution** smaller bore cylinders or **used/refurbished units** may suffice.

Your application requires **high-speed or frequent cycling** consider **electromechanical actuators** for better efficiency.

**Maintenance resources are limited** simpler, lower-pressure cylinders may be more reliable.

**Space is constrained** a **shorter-stroke or different mounting style** may be necessary.

- **Buy from an authorized Parker dealer or reputable hydraulic supplier** to ensure **genuine, high-quality unit**.

- **Request a full service history** if buying used check for **seal replacements, pressure tests, and rod inspections**.

- **Verify compatibility** with your existing hydraulic system (pressure, flow rate, fluid type).

- **Budget for maintenance** allocate funds for **seal kits, lubrication, and periodic inspections**.

- **Consider a warranty or service contract** if available to cover potential early failures.

This cylinder is a **strong investment for heavy-duty industrial applications** where **reliability and load capacity** are critical. However, it is **not a plug-and-play solution** it demands **proper installation, maintenance, and system compatibility**. If these factors align with your needs, it is an **excellent choice**; otherwise, a **smaller or alternative actuator** may be more practical.

Details:

All products are guaranteed to be working but may show signs of use if purchasing a used product. Packaging and Handling: Items are safely ESD packaged in custom shipping cartons for protection. Sells new and surplus product develops channels to purchase such. Part Number 02.50 CJ2MABUS14C 7.000.

Call to use a shipping service other than the ones listed.

part #: 0250 prices

• $75.00-$350.00

specifications hydraulicylind:

• brand: Cylinder Division
• mpn: 02.50

offer hydraulicylind:

• started: February 6, 2026
• options: Ship-to-home
• sold: 0
• availability: In Stock
• quantity: 1

shipping hydraulicylind:

• type: Fixed
• service: Standard
• transit: 32-36 Days
• class: Standard
• cost: $12.90

returns hydraulicylind:

• time: 30 Days
• policy: Returns Accepted
• paid by: Buyer
• method: Money back

seller hydraulicylind:

• # reviews: 189068
• rating: 99.5%
• city: 1 Millennium Dr, Willingboro, NJ 08046

payments hydraulicylind:

• credit card: Visa
• wallet: Apple-pay
• other

general hydraulicylind:

• condition: Used
• Business Industrial > Hydraulics, Pneumatics, Pumps Plumbing > Hydraulic Pneumatic Cylinders

Cylinder Division 02.50 Is Similar To:

• .44bfnsrbv00.5 Parker Cylinder Bore Stroke (22.2% similar) Inventory 63039NEW old stock. 44BFNSRBV00. Parker Cylinder. 5 bore 7/1 6IN stroke 1/2 in...(July 2nd, 2018)
• .56dxpsr10.0 Parker Stainless Steel Cylinder (28.6% similar) Parker stainless steel Cylinder...(May 7th, 2018)
• .75nrpsr01.0 Parker Pnuematic Cylinder (30.1% similar) ...(May 26th, 2018)
• .75nsr01.5 Parker Cylinder Stainless Bore Stroke (24.4% similar) 5 stainless 3/4 bore stroke inventory 63010NEW old stock. Parker Cylinder...(May 2nd, 2018)
• .75nsr02.0 75nsr02.0 Parker Cylinder Stainless 3-4 (30.4% similar) Stainless 3/4 bore 2 stroke inventory 63012NEW old stock. Parker Cylinder...(November 3rd, 2017)
• .75psr02.0 75psr02.0 Parker Pneumatic Cylinder Stainless (33.6% similar) Please e-mail all questions or comments, to better understand what you are buying on. Actual shipping may vary. Unit - shelf tub 5DARRELL. For office use only...(January 8th, 2018)
• .75tfdsrb07.0 75tfdsrb07.0 Parker Used Cylinder Exlnt (31.3% similar) Please enter the shipping dimensions and weight listed above. Comes as pictured shipping info:flat rate: used,parker Cylinder. 0, used exiling. Used, parker Cylinder. Over 100,000,000 served. Check us out today...(December 1st, 2017)
• .75x2.00 Parker Series Air Cylinder Spring Return Shaft Bore (20.7% similar) It does mean that northern MRI may have not tested the items or assessed their performance operation, and therefore lacks any specific knowledge concerning condition of. The goal of northern MRI supply is to be a low cost provider for material that used or excess and quickly easily end user 3RD ...(May 19th, 2018)
• .88dxrsr01.0 88dxrsr01.0 Parker Pnuematic Cylinder (32% similar) ...(September 5th, 2017)
• 0.200-cj2maus34ac-14.000 Parker Air Piston Cylinder (42.9% similar) Air piston Cylinder 250 psi. 200-CJ2MAUS34AC-14...(January 16th, 2019)
• 0.44bfnsr03.00 Parker Bore Front Block Air Cylinder Stroke (24.1% similar) Condition is new...(July 7th, 2019)